Influence of Quartz on Mechanical Properties of Electroporcelain Subjected to a Cyclic Test

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F23%3A00373862" target="_blank" >RIV/68407700:21110/23:00373862 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1063/5.0146729" target="_blank" >https://doi.org/10.1063/5.0146729</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1063/5.0146729" target="_blank" >10.1063/5.0146729</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of Quartz on Mechanical Properties of Electroporcelain Subjected to a Cyclic Test

Popis výsledku v původním jazyce

This paper describes the influence of quartz on the mechanical properties of electroporcelain. The amount of quartz was controlled during sample preparation. Four groups of samples were made by extrusion with the addition of 0 wt.%, 1 wt.%, 2 wt.%, and 4 wt.% of quartz. Samples were fired at a temperature of 1320 °C, which is a common temperature for this type of ceramics. After finding the nominal value of mechanical strength for each group, the samples were cyclically tested by 50% of the nominal mechanical strength. Tested samples were cracked by a three-point bending machine for obtaining mechanical strength. Due to the results, it can be concluded that the residual quartz negatively affected the mechanical strength. With an increasing amount of quartz, the mechanical strength decreased. However, the amount of quartz does not have an impact on cyclic tests. The influence of the amount of quartz on the value of the mechanical strength after 100 and 500 cycles is negligible.

Název v anglickém jazyce

Influence of Quartz on Mechanical Properties of Electroporcelain Subjected to a Cyclic Test

Popis výsledku anglicky

This paper describes the influence of quartz on the mechanical properties of electroporcelain. The amount of quartz was controlled during sample preparation. Four groups of samples were made by extrusion with the addition of 0 wt.%, 1 wt.%, 2 wt.%, and 4 wt.% of quartz. Samples were fired at a temperature of 1320 °C, which is a common temperature for this type of ceramics. After finding the nominal value of mechanical strength for each group, the samples were cyclically tested by 50% of the nominal mechanical strength. Tested samples were cracked by a three-point bending machine for obtaining mechanical strength. Due to the results, it can be concluded that the residual quartz negatively affected the mechanical strength. With an increasing amount of quartz, the mechanical strength decreased. However, the amount of quartz does not have an impact on cyclic tests. The influence of the amount of quartz on the value of the mechanical strength after 100 and 500 cycles is negligible.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20504 - Ceramics

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Central European Symposium on Thermophysics 2022 (CEST 2022)

ISBN

—

ISSN

1551-7616

e-ISSN

1551-7616

Počet stran výsledku

5

Strana od-do

—

Název nakladatele

AIP Conference Proceedings

Místo vydání

New York

Místo konání akce

Olomouc

Datum konání akce

31. 8. 2022

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—