Applications of the High-Pressure Membranes in Design of Element of Mechanisms

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F06%3A00122607" target="_blank" >RIV/68407700:21220/06:00122607 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Applications of the High-Pressure Membranes in Design of Element of Mechanisms

Popis výsledku v původním jazyce

There was designed and realized an experimental stand which consists of a hydraulic circuit (maximal value of working pressure is 32 MPa) with numerical control of the relationship between time and pressure and an experimental chamber. It is possible tocarry out static or dynamic tests which are ended by destroying of tested membrane. There are obtained the strength of membrane, their sag under the load and the vibration fatigue limit. The membrane was designed for a membrane hydraulic motor with low stroke which is used also in design of gripper element of manipulator. In this case the membrane hydraulic motor is used as an actuating unit. Application of composite material in mechanisms design supports the use of principles which have simple conceptions and are experimentally and practically verified and the creation of new principles in design.

Název v anglickém jazyce

Applications of the High-Pressure Membranes in Design of Element of Mechanisms

Popis výsledku anglicky

There was designed and realized an experimental stand which consists of a hydraulic circuit (maximal value of working pressure is 32 MPa) with numerical control of the relationship between time and pressure and an experimental chamber. It is possible tocarry out static or dynamic tests which are ended by destroying of tested membrane. There are obtained the strength of membrane, their sag under the load and the vibration fatigue limit. The membrane was designed for a membrane hydraulic motor with low stroke which is used also in design of gripper element of manipulator. In this case the membrane hydraulic motor is used as an actuating unit. Application of composite material in mechanisms design supports the use of principles which have simple conceptions and are experimentally and practically verified and the creation of new principles in design.

Druh

D - Stať ve sborníku

CEP obor

JQ - Strojní zařízení a nástroje

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2006

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Advanced Engineering Design AED 2006

ISBN

80-86059-44-8

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

—

Název nakladatele

ČVUT

Místo vydání

Praha

Místo konání akce

Prague

Datum konání akce

11. 6. 2006

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—