Optimal water distribution in the cooling tower

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F09%3A00161237" target="_blank" >RIV/68407700:21220/09:00161237 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Optimal water distribution in the cooling tower

Popis výsledku v původním jazyce

A cooling tower is a heat rejection device, which distributes wasted heat to the atmosphere through the cooling of water by air. In this case low pressure nozzles usually distribute water from the pipelines onto the fill. Cooling tower nozzle characteristics such as the water distribution around the nozzle, flow rate, distance between nozzles and distance between pipelines are important for the cooling tower water distribution design. Parameters such as water distribution around the nozzle and flow ratewere simply obtained from measurements. The distance between nozzles and the distance between pipelines were obtained from the superposition of water distribution around every single nozzle determined by optimal water distribution onto the fill. We gotthis optimal water distribution from optimization of parameters (distance between nozzles and the distance between pipelines) by means of simplex method.

Název v anglickém jazyce

Optimal water distribution in the cooling tower

Popis výsledku anglicky

A cooling tower is a heat rejection device, which distributes wasted heat to the atmosphere through the cooling of water by air. In this case low pressure nozzles usually distribute water from the pipelines onto the fill. Cooling tower nozzle characteristics such as the water distribution around the nozzle, flow rate, distance between nozzles and distance between pipelines are important for the cooling tower water distribution design. Parameters such as water distribution around the nozzle and flow ratewere simply obtained from measurements. The distance between nozzles and the distance between pipelines were obtained from the superposition of water distribution around every single nozzle determined by optimal water distribution onto the fill. We gotthis optimal water distribution from optimization of parameters (distance between nozzles and the distance between pipelines) by means of simplex method.

Druh

O - Ostatní výsledky

CEP obor

BK - Mechanika tekutin

OECD FORD obor

—

Projekt

<a href="/cs/project/1M06059" target="_blank" >1M06059: Progresivní technologie a systémy pro energetiku</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2009

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů