Pitched Blade Turbine Efficiency at Particle Suspension
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F10%3A00174657" target="_blank" >RIV/68407700:21220/10:00174657 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Pitched Blade Turbine Efficiency at Particle Suspension
Popis výsledku v původním jazyce
This paper deals with effect relative impeller size and particle content on the efficiency of a pitched six-blade turbine at particle suspension.Two pitched six-blade turbines were used in model measurements of just suspension impeller speed. The ratiosof the vessel to agitator diameter D/d were 3 and 4.5. The measurements were carried out in a dish-bottomed vessel 300 mm in diameter. The just suspension impeller speeds were measured using an electrochemical method, and were checked visually. A 2.5 % NaCl water solution was used as the liquid phase, and glass particles with four equivalent diameters between 0.18 and 0.89 mm and volumetric concentration from 2.5 % to 40 % were used as the solid phase. The criterion values ?(s) were calculated from theparticle suspension and power consumption measurements. The dependencies of ?(s) on particle content c(v) show that larger agitators are more efficient for higher particle content.
Název v anglickém jazyce
Pitched Blade Turbine Efficiency at Particle Suspension
Popis výsledku anglicky
This paper deals with effect relative impeller size and particle content on the efficiency of a pitched six-blade turbine at particle suspension.Two pitched six-blade turbines were used in model measurements of just suspension impeller speed. The ratiosof the vessel to agitator diameter D/d were 3 and 4.5. The measurements were carried out in a dish-bottomed vessel 300 mm in diameter. The just suspension impeller speeds were measured using an electrochemical method, and were checked visually. A 2.5 % NaCl water solution was used as the liquid phase, and glass particles with four equivalent diameters between 0.18 and 0.89 mm and volumetric concentration from 2.5 % to 40 % were used as the solid phase. The criterion values ?(s) were calculated from theparticle suspension and power consumption measurements. The dependencies of ?(s) on particle content c(v) show that larger agitators are more efficient for higher particle content.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JP - Průmyslové procesy a zpracování
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/FR-TI1%2F005" target="_blank" >FR-TI1/005: Výzkum a vývoj efektivních aparátů s mechanickými míchadly pro suspenze pevné fáze v kapalině</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2010
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Acta Polytechnica
ISSN
1210-2709
e-ISSN
—
Svazek periodika
50
Číslo periodika v rámci svazku
6
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
3
Strana od-do
—
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—