Increase of Resistance on Surfaces of Critically Loaded Machine Parts by Application of Technology IBAD (Ion Beam Assisted Deposition).

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F11%3A00185317" target="_blank" >RIV/68407700:21220/11:00185317 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Increase of Resistance on Surfaces of Critically Loaded Machine Parts by Application of Technology IBAD (Ion Beam Assisted Deposition).

Popis výsledku v původním jazyce

Main objective of this project is to assess and to prove experimentally the increase of operating life/resistance of critically loaded selected parts by implementing the technology IBAD (coating the surfaces by TiN and CrN). The parameters of gearboxes are in large measure determined by the quality of individual mating gears. The technology of production of gears is most of the time such that cementing and hardening is used. This is probably the best form of technology at the present time resulting in the optimum results from the point of view of fatigue load of the gear tooth flank. Similarly the loading capacity and durability of rolling bearings is determined by the quality of manufacture and surface finish of the rolling elements and raceways. Thisincludes also bushings, clevis pins, points, serrations, sealing surfaces of armatures and such.

Název v anglickém jazyce

Increase of Resistance on Surfaces of Critically Loaded Machine Parts by Application of Technology IBAD (Ion Beam Assisted Deposition).

Popis výsledku anglicky

Main objective of this project is to assess and to prove experimentally the increase of operating life/resistance of critically loaded selected parts by implementing the technology IBAD (coating the surfaces by TiN and CrN). The parameters of gearboxes are in large measure determined by the quality of individual mating gears. The technology of production of gears is most of the time such that cementing and hardening is used. This is probably the best form of technology at the present time resulting in the optimum results from the point of view of fatigue load of the gear tooth flank. Similarly the loading capacity and durability of rolling bearings is determined by the quality of manufacture and surface finish of the rolling elements and raceways. Thisincludes also bushings, clevis pins, points, serrations, sealing surfaces of armatures and such.

Druh

O - Ostatní výsledky

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů