MILLING TOOL DEFORMATION CAUSED BY HEATING DURING THE CUTTING PROCESS
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F14%3A00223370" target="_blank" >RIV/68407700:21220/14:00223370 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
MILLING TOOL DEFORMATION CAUSED BY HEATING DURING THE CUTTING PROCESS
Popis výsledku v původním jazyce
The presented paper describes an experiment dealing with the deformation of a milling tool caused by heating during the cutting process. Based on the literature review an experimental procedure is designed to simulate heating of the milling tool during machining. The experimental heating of the milling tool is realized using a laser beam. The frequency of laser radiation and the length of each pulse are selected in order to simulate the real cutting process. The output power of the laser radiation is 10W or 20W. During the experiment deformation and temperature of the tool are measured. In the second part of the presented article an experiment is carried out investigating the heating and deformation of the milling tool during real machining of an aluminium alloy. The experiment consists of several test cycles, when a different amount of material is removed. Deformations of the tool and also of the machine tool are measured immediately after milling, and during cooling to ambient temper
Název v anglickém jazyce
MILLING TOOL DEFORMATION CAUSED BY HEATING DURING THE CUTTING PROCESS
Popis výsledku anglicky
The presented paper describes an experiment dealing with the deformation of a milling tool caused by heating during the cutting process. Based on the literature review an experimental procedure is designed to simulate heating of the milling tool during machining. The experimental heating of the milling tool is realized using a laser beam. The frequency of laser radiation and the length of each pulse are selected in order to simulate the real cutting process. The output power of the laser radiation is 10W or 20W. During the experiment deformation and temperature of the tool are measured. In the second part of the presented article an experiment is carried out investigating the heating and deformation of the milling tool during real machining of an aluminium alloy. The experiment consists of several test cycles, when a different amount of material is removed. Deformations of the tool and also of the machine tool are measured immediately after milling, and during cooling to ambient temper
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JQ - Strojní zařízení a nástroje
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/FR-TI4%2F654" target="_blank" >FR-TI4/654: *Komplexní řešení teplotních deformací obráběcích strojů</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2014
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Journal of Machine Engineering
ISSN
1895-7595
e-ISSN
—
Svazek periodika
14
Číslo periodika v rámci svazku
2
Stát vydavatele periodika
PL - Polská republika
Počet stran výsledku
12
Strana od-do
81-92
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—