Comparison of different image intensifiers used for combustion measurement

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F18%3A00327280" target="_blank" >RIV/68407700:21220/18:00327280 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Comparison of different image intensifiers used for combustion measurement

Popis výsledku v původním jazyce

This paper deals with setting of the acquisition equipment used to visualize and measure the concentration of intermediate species chemiluminescence combustion and laser-induced fluorescence. Observed intermediates such as OH, NO, CH and others have an emitted UV spectrum and their signal is very weak. For this reason, it is necessary to use a suitable image intensifier, and its proper setting and synchronization with the camera is also very important. In view of this problem, the following text deals with the appropriate setting of selected optical amplifiers with P46 and P43. Because the recording equipment can be used for both LIF and chemiluminescence, the experimentally determined setting will be performed using the OH-chemiluminescence method. This is reported by a weaker signal and creates a more stringent setup criterion. As a qualitative factor, a gradient of the image function has been selected, which plays a significant role in edge detection and therefore also in flame front position detection.

Název v anglickém jazyce

Comparison of different image intensifiers used for combustion measurement

Popis výsledku anglicky

This paper deals with setting of the acquisition equipment used to visualize and measure the concentration of intermediate species chemiluminescence combustion and laser-induced fluorescence. Observed intermediates such as OH, NO, CH and others have an emitted UV spectrum and their signal is very weak. For this reason, it is necessary to use a suitable image intensifier, and its proper setting and synchronization with the camera is also very important. In view of this problem, the following text deals with the appropriate setting of selected optical amplifiers with P46 and P43. Because the recording equipment can be used for both LIF and chemiluminescence, the experimentally determined setting will be performed using the OH-chemiluminescence method. This is reported by a weaker signal and creates a more stringent setup criterion. As a qualitative factor, a gradient of the image function has been selected, which plays a significant role in edge detection and therefore also in flame front position detection.

Druh

O - Ostatní výsledky

CEP obor

—

OECD FORD obor

20303 - Thermodynamics

Projekt

<a href="/cs/project/LO1311" target="_blank" >LO1311: Rozvoj Centra vozidel udržitelné mobility</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů