Control of droplet size in rain-zone in wet cooling tower

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F18%3A00329528" target="_blank" >RIV/68407700:21220/18:00329528 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.epj-conferences.org/articles/epjconf/abs/2018/15/epjconf_efm2018_02119/epjconf_efm2018_02119.html" target="_blank" >https://www.epj-conferences.org/articles/epjconf/abs/2018/15/epjconf_efm2018_02119/epjconf_efm2018_02119.html</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1051/epjconf/201818002119" target="_blank" >10.1051/epjconf/201818002119</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Control of droplet size in rain-zone in wet cooling tower

Popis výsledku v původním jazyce

The performance of the wet cooling tower is significantly affected by the droplet size occurring in the rain zone. In order to effectively manage the size of these droplets, it was necessary to experimentally determine the effect of the fills of the cooling towers on droplets. Five types of cooling fillers were used for experimental measurements: 3 film fills and 2 splash fills - trickle and grid. Drop size measurements were performed using the LIF method. Histograms of droplets size were obtained from measured droplet sizes under each fill, and for each fill, the Sauter droplet diameter was then calculated. According to a theoretical analysis of a breakdown of droplets, the combinations of some fills and the effect of their surface treatment on the droplet diameter were then measured for comparison.

Název v anglickém jazyce

Control of droplet size in rain-zone in wet cooling tower

Popis výsledku anglicky

The performance of the wet cooling tower is significantly affected by the droplet size occurring in the rain zone. In order to effectively manage the size of these droplets, it was necessary to experimentally determine the effect of the fills of the cooling towers on droplets. Five types of cooling fillers were used for experimental measurements: 3 film fills and 2 splash fills - trickle and grid. Drop size measurements were performed using the LIF method. Histograms of droplets size were obtained from measured droplet sizes under each fill, and for each fill, the Sauter droplet diameter was then calculated. According to a theoretical analysis of a breakdown of droplets, the combinations of some fills and the effect of their surface treatment on the droplet diameter were then measured for comparison.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/TE01020036" target="_blank" >TE01020036: Pokročilé technologie pro výrobu tepla a elektřiny</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

EFM 17 - Experimental Fluid Mechanics 2017

ISBN

—

ISSN

2100-014X

e-ISSN

2100-014X

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

EDP Sciences - Web of Conferences

Místo vydání

Les Ulis Cedex A

Místo konání akce

Mikulov

Datum konání akce

21. 11. 2017

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000454317800120