WELDING OF NITINOL BY SELECTED TECHNOLOGIES

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F19%3A00335032" target="_blank" >RIV/68407700:21220/19:00335032 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.14311/AP.2019.59.0042" target="_blank" >https://doi.org/10.14311/AP.2019.59.0042</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/AP.2019.59.0042" target="_blank" >10.14311/AP.2019.59.0042</a>

Jazyk výsledku

angličtina

Název v původním jazyce

WELDING OF NITINOL BY SELECTED TECHNOLOGIES

Popis výsledku v původním jazyce

Nitinol is a perspective alloy that is difficult to weld because of its high sensitivity to heat, atmospheric gases and the NiTi phase instability. We evaluated several welding techniques with regard to their applicability to weld fine pseudoelastic NiTi wires. Namely, we tested the microplasma arc, laser, electron beam, resistance and capacitor discharge welding. In conclusion, the behaviour of the weld for any of the implemented welding techniques is similar; it leads to a loss of mechanical properties in the welded joint caused by a recrystallization and an increased amount of brittle intermetallic phases. Yet, under perfect shielding and with a minimum heat input, the welds could, as a whole, retain the majority of their properties, and, as such, have the desired properties close to the base metal.

Název v anglickém jazyce

WELDING OF NITINOL BY SELECTED TECHNOLOGIES

Popis výsledku anglicky

Nitinol is a perspective alloy that is difficult to weld because of its high sensitivity to heat, atmospheric gases and the NiTi phase instability. We evaluated several welding techniques with regard to their applicability to weld fine pseudoelastic NiTi wires. Namely, we tested the microplasma arc, laser, electron beam, resistance and capacitor discharge welding. In conclusion, the behaviour of the weld for any of the implemented welding techniques is similar; it leads to a loss of mechanical properties in the welded joint caused by a recrystallization and an increased amount of brittle intermetallic phases. Yet, under perfect shielding and with a minimum heat input, the welds could, as a whole, retain the majority of their properties, and, as such, have the desired properties close to the base metal.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/EF16_019%2F0000826" target="_blank" >EF16_019/0000826: Centrum pokročilých leteckých technologií</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Polytechnica

ISSN

1210-2709

e-ISSN

1805-2363

Svazek periodika

59

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

9

Strana od-do

42-50

Kód UT WoS článku

000462321600005

EID výsledku v databázi Scopus

2-s2.0-85063147893