Integration of adsorption based post-combustion carbon dioxide capture for a natural gas-fired combined heat and power plant

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F23%3A00367686" target="_blank" >RIV/68407700:21220/23:00367686 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1016/j.fuel.2023.129346" target="_blank" >https://doi.org/10.1016/j.fuel.2023.129346</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.fuel.2023.129346" target="_blank" >10.1016/j.fuel.2023.129346</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Integration of adsorption based post-combustion carbon dioxide capture for a natural gas-fired combined heat and power plant

Popis výsledku v původním jazyce

This paper proposes a continuous CO2 capture system for natural gas combined heat and power (CHP) facility and explores the potential of low-temperature vacuum-swing adsorption (VSA) process for post-combustion CO2 capture (PCC) in the context of carbon capture and storage (CCS). Although VSA has strong potential for efficient CO2 capture in district-scale energy systems, previous case studies have largely focused on high-emission coal combustion sources, making VSA application challenging for these conditions. We address this issue by theoretically designing a ready-to-operate flue gas cleaning process with CCS for a medium-sized 4.3 MW natural gas CHP operating in the local industry. Our in-depth analysis examines the most critical parts such as dehydration, involving condenser and temperature-swing adsorption (TSA), and CO2 capture via VSA. The conceptual design and performance of VSA are approached by developing a mathematical model to estimate the technology size and performance. This work shows that utilising a small fraction of heat recovered from CHP-generated flue gas is sufficient to supply the necessary heat for auxiliary units, and that using natural cooling water for dehydration effectively reduces moisture (87 vol%) and energy demand for final dehydration via TSA. Furthermore, it demonstrates that 4-step VSA consisting of 15 columns using zeolite 13X can separate CO2 with a desired purity of 90.4%, meeting the requirements for CO2 storage and transportation onshore, at a 15.6% recovery rate. The cost of achieving high CO2 purity without pre-pressurising the CO2-rich flue gas, while maintaining cycle simplicity, is discussed. Overall, our paper provides a comprehensive approach to retrofitting distract-scale power plants with CO2-lean emissions, presenting a ready-to-operate flue gas cleaning technology based on real operating conditions and technical restrictions, which can contribute towards decarbonisation.

Název v anglickém jazyce

Integration of adsorption based post-combustion carbon dioxide capture for a natural gas-fired combined heat and power plant

Popis výsledku anglicky

This paper proposes a continuous CO2 capture system for natural gas combined heat and power (CHP) facility and explores the potential of low-temperature vacuum-swing adsorption (VSA) process for post-combustion CO2 capture (PCC) in the context of carbon capture and storage (CCS). Although VSA has strong potential for efficient CO2 capture in district-scale energy systems, previous case studies have largely focused on high-emission coal combustion sources, making VSA application challenging for these conditions. We address this issue by theoretically designing a ready-to-operate flue gas cleaning process with CCS for a medium-sized 4.3 MW natural gas CHP operating in the local industry. Our in-depth analysis examines the most critical parts such as dehydration, involving condenser and temperature-swing adsorption (TSA), and CO2 capture via VSA. The conceptual design and performance of VSA are approached by developing a mathematical model to estimate the technology size and performance. This work shows that utilising a small fraction of heat recovered from CHP-generated flue gas is sufficient to supply the necessary heat for auxiliary units, and that using natural cooling water for dehydration effectively reduces moisture (87 vol%) and energy demand for final dehydration via TSA. Furthermore, it demonstrates that 4-step VSA consisting of 15 columns using zeolite 13X can separate CO2 with a desired purity of 90.4%, meeting the requirements for CO2 storage and transportation onshore, at a 15.6% recovery rate. The cost of achieving high CO2 purity without pre-pressurising the CO2-rich flue gas, while maintaining cycle simplicity, is discussed. Overall, our paper provides a comprehensive approach to retrofitting distract-scale power plants with CO2-lean emissions, presenting a ready-to-operate flue gas cleaning technology based on real operating conditions and technical restrictions, which can contribute towards decarbonisation.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20704 - Energy and fuels

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Fuel

ISSN

0016-2361

e-ISSN

1873-7153

Svazek periodika

354

Číslo periodika v rámci svazku

129346

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

11

Strana od-do

1-11

Kód UT WoS článku

001053150800001

EID výsledku v databázi Scopus

2-s2.0-85166767694