A Study of the coarse droplet formation from the liquid film in steam turbines

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F23%3A00369279" target="_blank" >RIV/68407700:21220/23:00369279 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1051/matecconf/202338300003" target="_blank" >https://doi.org/10.1051/matecconf/202338300003</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1051/matecconf/202338300003" target="_blank" >10.1051/matecconf/202338300003</a>

Jazyk výsledku

angličtina

Název v původním jazyce

A Study of the coarse droplet formation from the liquid film in steam turbines

Popis výsledku v původním jazyce

For all the deployment of the non-fossil energy sources the steam turbine remains the most important energy transforming device. In the current situation when the daily operation of the turbines is not predictable due to electricity supply from the photovoltaic and the wind power plants, the turbines work in the non-design conditions, the danger of the blade’s erosion caused by the coarse droplets is assumed. The purpose of this paper is to suggest the possible formation process of the coarse droplets in the steam turbine. The current studies were focused mostly on the measurement or identification of the coarse droplets in the steam turbine, but the explanation of the archived results was not sufficient. An analysis of the droplets formed in the wind tunnel indicates, for the majority of the measurements, the part of the formed droplets is bigger than the critical Weber number limit. Similar, but less detail, experience was achieved for measurement in the steam turbine. This paper introduces simple analysis of the optically measured coarse droplets size distribution with the modelled flow field behind the blade fitted by measured velocity field. A detailed hot wire measurement was performed in the vicinity of the trailing edge where the liquid film is disrupted to the coarse droplets.

Název v anglickém jazyce

A Study of the coarse droplet formation from the liquid film in steam turbines

Popis výsledku anglicky

For all the deployment of the non-fossil energy sources the steam turbine remains the most important energy transforming device. In the current situation when the daily operation of the turbines is not predictable due to electricity supply from the photovoltaic and the wind power plants, the turbines work in the non-design conditions, the danger of the blade’s erosion caused by the coarse droplets is assumed. The purpose of this paper is to suggest the possible formation process of the coarse droplets in the steam turbine. The current studies were focused mostly on the measurement or identification of the coarse droplets in the steam turbine, but the explanation of the archived results was not sufficient. An analysis of the droplets formed in the wind tunnel indicates, for the majority of the measurements, the part of the formed droplets is bigger than the critical Weber number limit. Similar, but less detail, experience was achieved for measurement in the steam turbine. This paper introduces simple analysis of the optically measured coarse droplets size distribution with the modelled flow field behind the blade fitted by measured velocity field. A detailed hot wire measurement was performed in the vicinity of the trailing edge where the liquid film is disrupted to the coarse droplets.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20303 - Thermodynamics

Projekt

<a href="/cs/project/EF16_019%2F0000753" target="_blank" >EF16_019/0000753: Centrum výzkumu nízkouhlíkových energetických technologií</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

MATEC Web of Conferences

ISSN

2261-236X

e-ISSN

2261-236X

Svazek periodika

383

Číslo periodika v rámci svazku

10

Stát vydavatele periodika

FR - Francouzská republika

Počet stran výsledku

10

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—