Vše

Co hledáte?

Vše
Projekty
Výsledky výzkumu
Subjekty

Rychlé hledání

  • Projekty podpořené TA ČR
  • Významné projekty
  • Projekty s nejvyšší státní podporou
  • Aktuálně běžící projekty

Chytré vyhledávání

  • Takto najdu konkrétní +slovo
  • Takto z výsledků -slovo zcela vynechám
  • “Takto můžu najít celou frázi”

Plasma hardfacing of metal matrix composite reinforced with non-oxide ceramics

Identifikátory výsledku

  • Kód výsledku v IS VaVaI

    <a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F25%3A00386530" target="_blank" >RIV/68407700:21220/25:00386530 - isvavai.cz</a>

  • Výsledek na webu

    —

  • DOI - Digital Object Identifier

    —

Alternativní jazyky

  • Jazyk výsledku

    angličtina

  • Název v původním jazyce

    Plasma hardfacing of metal matrix composite reinforced with non-oxide ceramics

  • Popis výsledku v původním jazyce

    This study investigates the fabrication of metal matrix composites (MMCs) through pulsed plasma transferred arc (PTA) deposition of Inconel 625® superalloy reinforced with silicon carbide (SiC) particles. The objective was to create uniform coatings with well-distributed SiC reinforcements that were metallurgically bonded to the substrate material. Ten experimental samples were fabricated using varying process parameters. The influence of the pulse current (75-90 A), pulse frequency (28-200 Hz), and plasmatron distance from the substrate (4-10 mm) was monitored. Temperature monitoring during deposition revealed peak temperatures ranging between 1100-1200°C depending on the process parameters. Microstructural analysis using optical and scanning electron microscopy showed semi-successful incorporation of SiC particles within the Inconel 625® matrix, with energy-dispersive spectroscopy (EDS) confirming the presence of silicon, carbon, and nickel-based phases. Microhardness measurements demonstrated significant hardening effects, with values increasing from 250 HV for pure Inconel 625® to 400-600 HV for SiC-reinforced composites. The results indicate that optimal processing conditions involve higher pulse currents (90 A), higher frequencies (200 Hz), and a shorter plasmatron distance from the substrate (4 mm) to achieve a uniform distribution while minimizing porosity and cracking. This study contributes to the understanding of PTA processing parameters for fabricating high-performance MMC coatings suitable for wear-resistant applications.

  • Název v anglickém jazyce

    Plasma hardfacing of metal matrix composite reinforced with non-oxide ceramics

  • Popis výsledku anglicky

    This study investigates the fabrication of metal matrix composites (MMCs) through pulsed plasma transferred arc (PTA) deposition of Inconel 625® superalloy reinforced with silicon carbide (SiC) particles. The objective was to create uniform coatings with well-distributed SiC reinforcements that were metallurgically bonded to the substrate material. Ten experimental samples were fabricated using varying process parameters. The influence of the pulse current (75-90 A), pulse frequency (28-200 Hz), and plasmatron distance from the substrate (4-10 mm) was monitored. Temperature monitoring during deposition revealed peak temperatures ranging between 1100-1200°C depending on the process parameters. Microstructural analysis using optical and scanning electron microscopy showed semi-successful incorporation of SiC particles within the Inconel 625® matrix, with energy-dispersive spectroscopy (EDS) confirming the presence of silicon, carbon, and nickel-based phases. Microhardness measurements demonstrated significant hardening effects, with values increasing from 250 HV for pure Inconel 625® to 400-600 HV for SiC-reinforced composites. The results indicate that optimal processing conditions involve higher pulse currents (90 A), higher frequencies (200 Hz), and a shorter plasmatron distance from the substrate (4 mm) to achieve a uniform distribution while minimizing porosity and cracking. This study contributes to the understanding of PTA processing parameters for fabricating high-performance MMC coatings suitable for wear-resistant applications.

Klasifikace

  • Druh

    O - Ostatní výsledky

  • CEP obor

    —

  • OECD FORD obor

    20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Návaznosti výsledku

  • Projekt

    —

  • Návaznosti

    S - Specificky vyzkum na vysokych skolach

Ostatní

  • Rok uplatnění

    2025

  • Kód důvěrnosti údajů

    S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů