Combined Accelerated Climatic Tests of Electrically Conductive Adhesives

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21230%2F10%3A00172236" target="_blank" >RIV/68407700:21230/10:00172236 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Combined Accelerated Climatic Tests of Electrically Conductive Adhesives

Popis výsledku v původním jazyce

Electrically Conductive Adhesives (ECAs) are one of the relatively new and quickly expanding replacements for the use of classic lead-based solders in the electronics industry. However this expansion comes at a cost - and one of the most important aspects of this cost is the spreading of ECAs into less than favorable operating environments. While in the past ECAs were used mostly on static LCD screens, nowadays their use did spread already into the realm of portable devices and car electronics. This ofcourse means, that such devices are subjected to much harsher climatic and mechanical stresses than table-mounted flat screens. However, there is a lack of a long-term experience with such applications and thus it is hard to assess the reliability of electronic devices using ECAs. To expand our knowledge about their reliability in such conditions, a series of experiments was undertaken and will be presented in this article.

Název v anglickém jazyce

Combined Accelerated Climatic Tests of Electrically Conductive Adhesives

Popis výsledku anglicky

Electrically Conductive Adhesives (ECAs) are one of the relatively new and quickly expanding replacements for the use of classic lead-based solders in the electronics industry. However this expansion comes at a cost - and one of the most important aspects of this cost is the spreading of ECAs into less than favorable operating environments. While in the past ECAs were used mostly on static LCD screens, nowadays their use did spread already into the realm of portable devices and car electronics. This ofcourse means, that such devices are subjected to much harsher climatic and mechanical stresses than table-mounted flat screens. However, there is a lack of a long-term experience with such applications and thus it is hard to assess the reliability of electronic devices using ECAs. To expand our knowledge about their reliability in such conditions, a series of experiments was undertaken and will be presented in this article.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JA - Elektronika a optoelektronika, elektrotechnika

OECD FORD obor

—

Projekt

<a href="/cs/project/OE229" target="_blank" >OE229: BESTPRODUCT- TENEEST Celoevropská síť environmentálního inženýrství</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

ElectroScope

ISSN

1802-4564

e-ISSN

—

Svazek periodika

2010

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

3

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—