Compact Size UWB Monopole Antenna with Triple Band-Notches
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21230%2F17%3A00314995" target="_blank" >RIV/68407700:21230/17:00314995 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.13164/re.2017.0057" target="_blank" >http://dx.doi.org/10.13164/re.2017.0057</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.13164/re.2017.0057" target="_blank" >10.13164/re.2017.0057</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Compact Size UWB Monopole Antenna with Triple Band-Notches
Popis výsledku v původním jazyce
This paper presents triple band notched ultra wide band (UWB) monopole antenna with overall size of 36 x 32 mm2 fed by microstrip transmission line. In order to achieve a good impedance matching from 2.7 GHz to 13.4 GHz, a tapered transition between the rectangular patch and the feeding line is utilized. The three notched frequency bands are accomplished by a defected microstrip structure (DMS) which is inserted in the microstrip feeding line and by an open loop slot etched in the radiating patch. The three band notches are 3.15–4 GHz, 5.7–6.3 GHz and 7.9–8.6 GHz. They prevent the receiving of the signals of IEEE 802.16 WiMAX band, WLAN band, and ITU applications respectively. The UWB antenna was designed and simulated, then fabricated and tested in order to investigate its impedance and radiation characteristics. Good agreement between the simulated and measured data is achieved. The obtained results show that the proposed antenna is convenient for UWB applications.
Název v anglickém jazyce
Compact Size UWB Monopole Antenna with Triple Band-Notches
Popis výsledku anglicky
This paper presents triple band notched ultra wide band (UWB) monopole antenna with overall size of 36 x 32 mm2 fed by microstrip transmission line. In order to achieve a good impedance matching from 2.7 GHz to 13.4 GHz, a tapered transition between the rectangular patch and the feeding line is utilized. The three notched frequency bands are accomplished by a defected microstrip structure (DMS) which is inserted in the microstrip feeding line and by an open loop slot etched in the radiating patch. The three band notches are 3.15–4 GHz, 5.7–6.3 GHz and 7.9–8.6 GHz. They prevent the receiving of the signals of IEEE 802.16 WiMAX band, WLAN band, and ITU applications respectively. The UWB antenna was designed and simulated, then fabricated and tested in order to investigate its impedance and radiation characteristics. Good agreement between the simulated and measured data is achieved. The obtained results show that the proposed antenna is convenient for UWB applications.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20201 - Electrical and electronic engineering
Návaznosti výsledku
Projekt
<a href="/cs/project/GA17-00607S" target="_blank" >GA17-00607S: Komplexní umělé elektromagnetické struktury a nanostruktury</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2017
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Radioengineering
ISSN
1210-2512
e-ISSN
—
Svazek periodika
26
Číslo periodika v rámci svazku
1
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
7
Strana od-do
57-63
Kód UT WoS článku
000399735900009
EID výsledku v databázi Scopus
2-s2.0-85018309931