Nanopowder derived Al/h-BN composites with high strength and

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21230%2F22%3A00363283" target="_blank" >RIV/68407700:21230/22:00363283 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1016/j.jallcom.2022.165199" target="_blank" >https://doi.org/10.1016/j.jallcom.2022.165199</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.jallcom.2022.165199" target="_blank" >10.1016/j.jallcom.2022.165199</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Nanopowder derived Al/h-BN composites with high strength and

Popis výsledku v původním jazyce

Al/h-BN composites with high tensile and compressive strength at room and elevated temperatures, as well as enhanced ductility, were obtained by a combination of ball milling (BM) and spark plasma sintering (SPS) using Al and hexagonal BN nanopowders (0, 1, 2, 3, 4, 5, and 10 wt% of h-BN). The use of two types of nanopowders is intended to ensure uniform distribution of the reinforcing phase and improve Al-BN chemical interaction at the manufacturing stages by increasing the surface-to-volume ratio. Due to Al with h-BN interaction, the Al/h-BN composites were simultaneously strengthened by three types of nanoparticles: Al2O3, AlN(O) and h-BN, predominantly located along the Al grain boundaries. Compared to BM +SPS aluminum, the tensile strength of Al-2 wt%BN composite increased by 82% (25 degrees C), 64% (300 degrees C), and 65% (500 degrees C), and the compressive strength by 107-119% (25-500 degrees C) while maintaining high elongation to failure in tension (13.6%, 11.6% and 10.8%) and compression (12.6%, 13.1% and 8.1%) at 25 degrees C, 300 degrees C, and 500 degrees C, respectively. In terms of combination of tensile and compressive strength at room and elevated temperatures, the Al/h-BN materials are superior to many other Al-based composites. The high strength and relative elongation to fracture of the Al/h-BN composites can be explained by the formation of a heterogeneous microstructure consisting of pure Al grains surrounded by a metal-matrix composite material with fine metal grains and reinforcing ceramic nanoinclusions. The obtained results significantly expand the scope of Al/h-BN materials, since their strength at 500 degrees C is higher than that of pure Al at room temperature.

Název v anglickém jazyce

Nanopowder derived Al/h-BN composites with high strength and

Popis výsledku anglicky

Al/h-BN composites with high tensile and compressive strength at room and elevated temperatures, as well as enhanced ductility, were obtained by a combination of ball milling (BM) and spark plasma sintering (SPS) using Al and hexagonal BN nanopowders (0, 1, 2, 3, 4, 5, and 10 wt% of h-BN). The use of two types of nanopowders is intended to ensure uniform distribution of the reinforcing phase and improve Al-BN chemical interaction at the manufacturing stages by increasing the surface-to-volume ratio. Due to Al with h-BN interaction, the Al/h-BN composites were simultaneously strengthened by three types of nanoparticles: Al2O3, AlN(O) and h-BN, predominantly located along the Al grain boundaries. Compared to BM +SPS aluminum, the tensile strength of Al-2 wt%BN composite increased by 82% (25 degrees C), 64% (300 degrees C), and 65% (500 degrees C), and the compressive strength by 107-119% (25-500 degrees C) while maintaining high elongation to failure in tension (13.6%, 11.6% and 10.8%) and compression (12.6%, 13.1% and 8.1%) at 25 degrees C, 300 degrees C, and 500 degrees C, respectively. In terms of combination of tensile and compressive strength at room and elevated temperatures, the Al/h-BN materials are superior to many other Al-based composites. The high strength and relative elongation to fracture of the Al/h-BN composites can be explained by the formation of a heterogeneous microstructure consisting of pure Al grains surrounded by a metal-matrix composite material with fine metal grains and reinforcing ceramic nanoinclusions. The obtained results significantly expand the scope of Al/h-BN materials, since their strength at 500 degrees C is higher than that of pure Al at room temperature.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

<a href="/cs/project/EF16_026%2F0008396" target="_blank" >EF16_026/0008396: Nové nanostruktury pro inženýrské aplikace umožněné kombinací moderních technologií a pokročilých simulací</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Alloys and Compounds

ISSN

0925-8388

e-ISSN

1873-4669

Svazek periodika

912

Číslo periodika v rámci svazku

August

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

11

Strana od-do

—

Kód UT WoS článku

000797259700002

EID výsledku v databázi Scopus

2-s2.0-85129253209