Study on the corrosion behavior of laser surface remelted and laser cladding of ferritic/martensitic steels after exposure to lead-bismuth eutectic at 700 °C

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21230%2F24%3A00373678" target="_blank" >RIV/68407700:21230/24:00373678 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1016/j.jnucmat.2023.154888" target="_blank" >https://doi.org/10.1016/j.jnucmat.2023.154888</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.jnucmat.2023.154888" target="_blank" >10.1016/j.jnucmat.2023.154888</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Study on the corrosion behavior of laser surface remelted and laser cladding of ferritic/martensitic steels after exposure to lead-bismuth eutectic at 700 °C

Popis výsledku v původním jazyce

This study explores two vital structural materials, T91 (Fe-9Cr) and SIMP (Fe-11Cr) steels, in the context of lead-cooled fast reactors and accelerator-driven sub-critical systems (ADS). Lead-bismuth eutectic (LBE) functions as a key coolant and spallation target material due to its impressive thermal conductivity, neutron yield, and chemical properties. Unfortunately, materials in contact with LBE are prone to severe corrosion at elevated temperatures (T>500 °C), compromising their integrity. To bolster corrosion resistance, we utilized laser remelting and laser cladding to apply FeCrAl/TiN coatings on the steel surfaces. Our study scrutinizes the corrosion behavior of steel in LBE saturated with oxygen at 700 °C and investigates the underlying causes. Following 240 h of exposure to corrosion, T91 and SIMP steels subjected to laser remelting displayed substantial oxide scale formation. Lead-bismuth atoms infiltrated the outer oxide layer (Fe3O4), diminishing adhesion between the inner and outer oxide layers, leading to the detachment of the outer oxide layer. The inner oxide layers, composed of Fe-Cr spinel, were approximately 123 μm thick for T91 steel and 77 μm for SIMP steel, underscoring SIMP steel's superior corrosion resistance. For T91 steel treated with laser cladding FeCrAl/TiN coating, a characteristic duplex oxide layer with a total thickness of around 83 μm was formed, with noticeable deposition of Pb-Bi atoms at the interface between the outer and inner oxide layers. Conversely, only a protective alumina layer safeguarded SIMP steel from LBE corrosion. This outcome emphasizes the efficacy of laser cladding FeCrAl/TiN coating in providing superior protection for SIMP steel over T91 steel. Our research significantly contributes to the development of anti-corrosion coatings for high-temperature LBE environments.

Název v anglickém jazyce

Study on the corrosion behavior of laser surface remelted and laser cladding of ferritic/martensitic steels after exposure to lead-bismuth eutectic at 700 °C

Popis výsledku anglicky

This study explores two vital structural materials, T91 (Fe-9Cr) and SIMP (Fe-11Cr) steels, in the context of lead-cooled fast reactors and accelerator-driven sub-critical systems (ADS). Lead-bismuth eutectic (LBE) functions as a key coolant and spallation target material due to its impressive thermal conductivity, neutron yield, and chemical properties. Unfortunately, materials in contact with LBE are prone to severe corrosion at elevated temperatures (T>500 °C), compromising their integrity. To bolster corrosion resistance, we utilized laser remelting and laser cladding to apply FeCrAl/TiN coatings on the steel surfaces. Our study scrutinizes the corrosion behavior of steel in LBE saturated with oxygen at 700 °C and investigates the underlying causes. Following 240 h of exposure to corrosion, T91 and SIMP steels subjected to laser remelting displayed substantial oxide scale formation. Lead-bismuth atoms infiltrated the outer oxide layer (Fe3O4), diminishing adhesion between the inner and outer oxide layers, leading to the detachment of the outer oxide layer. The inner oxide layers, composed of Fe-Cr spinel, were approximately 123 μm thick for T91 steel and 77 μm for SIMP steel, underscoring SIMP steel's superior corrosion resistance. For T91 steel treated with laser cladding FeCrAl/TiN coating, a characteristic duplex oxide layer with a total thickness of around 83 μm was formed, with noticeable deposition of Pb-Bi atoms at the interface between the outer and inner oxide layers. Conversely, only a protective alumina layer safeguarded SIMP steel from LBE corrosion. This outcome emphasizes the efficacy of laser cladding FeCrAl/TiN coating in providing superior protection for SIMP steel over T91 steel. Our research significantly contributes to the development of anti-corrosion coatings for high-temperature LBE environments.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Nuclear Materials

ISSN

0022-3115

e-ISSN

1873-4820

Svazek periodika

590

Číslo periodika v rámci svazku

March

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

13

Strana od-do

—

Kód UT WoS článku

001166067100001

EID výsledku v databázi Scopus

2-s2.0-85181110472