Investigation of Corrosion-Resistant LC200N Steel by Back Scattering Mossbauer Spectrometry

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21340%2F16%3A00310259" target="_blank" >RIV/68407700:21340/16:00310259 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1063/1.4966014" target="_blank" >http://dx.doi.org/10.1063/1.4966014</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1063/1.4966014" target="_blank" >10.1063/1.4966014</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Investigation of Corrosion-Resistant LC200N Steel by Back Scattering Mossbauer Spectrometry

Popis výsledku v původním jazyce

In this work we focus on characterization of LC200N steel by back-scattering Mossbauer spectrometry (MS). This geometry was used due to high sample thickness (0.5 mm). MS is a method suitable for determination of iron compounds and their properties in steels. We investigated samples with three different thermal treatments: non-hardened, hardened, and hardened with subsequent rapid quenching. Disk-shaped samples were cut off from original rods and polished from one side. The effect of surface treatment was investigated, too. Variations in microstructure imposed by different thermal and surface treatments were unveiled by Mossbauer parameters of backscattering spectra taken from both sides of the investigated samples. In this way, differences between the original as-cut and polished surfaces of the disks were unveiled.

Název v anglickém jazyce

Investigation of Corrosion-Resistant LC200N Steel by Back Scattering Mossbauer Spectrometry

Popis výsledku anglicky

In this work we focus on characterization of LC200N steel by back-scattering Mossbauer spectrometry (MS). This geometry was used due to high sample thickness (0.5 mm). MS is a method suitable for determination of iron compounds and their properties in steels. We investigated samples with three different thermal treatments: non-hardened, hardened, and hardened with subsequent rapid quenching. Disk-shaped samples were cut off from original rods and polished from one side. The effect of surface treatment was investigated, too. Variations in microstructure imposed by different thermal and surface treatments were unveiled by Mossbauer parameters of backscattering spectra taken from both sides of the investigated samples. In this way, differences between the original as-cut and polished surfaces of the disks were unveiled.

Druh

D - Stať ve sborníku

CEP obor

BM - Fyzika pevných látek a magnetismus

OECD FORD obor

—

Projekt

<a href="/cs/project/GA14-12449S" target="_blank" >GA14-12449S: Vliv radiace na vybrané fyzikální vlastnosti perspektivních slitin pro jaderná zařízení</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Mossbauer Spectroscopy in Materials Science 2016

ISBN

978-0-7354-1443-3

ISSN

0094-243X

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

AIP Conference Proceedings

Místo vydání

New York

Místo konání akce

Liptovský Ján

Datum konání akce

23. 5. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000389509200018