Preparing for the first Medipix detectors in space

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21670%2F12%3A00203741" target="_blank" >RIV/68407700:21670/12:00203741 - isvavai.cz</a>

Výsledek na webu

<a href="http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6187011&tag=1" target="_blank" >http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6187011&tag=1</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1109/AERO.2012.6187011" target="_blank" >10.1109/AERO.2012.6187011</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Preparing for the first Medipix detectors in space

Popis výsledku v původním jazyce

Current plans call for two separate missions to deploy Medipix2-Technology-based detectors in space for the first time. NASA is planning to deploy 5 or more Radiation Environment Monitor (REM) units, each of which will contain a Medipix2 TimePix-based detector assembly, on the International Space Station (ISS) during the spring of 2012 as part of a Station Detailed Test Objective (SDTO). These units will be mounted on a single 8-layer printed circuit board containing a USB-based interface. The entire unit will have the form of a typical USB flash-memory device, and the USB interface will provide interactive control and data readout as well as the operating power. Each of the units will be separately plugged into one of the 21 Lenovo? T-61B laptops thatare currently onboard the ISS. The purpose of this test is to acquire initial on-orbit data to allow feedback into the design of the next generation of Medipix device, which is intended to support the development of a portable, standalon

Název v anglickém jazyce

Preparing for the first Medipix detectors in space

Popis výsledku anglicky

Current plans call for two separate missions to deploy Medipix2-Technology-based detectors in space for the first time. NASA is planning to deploy 5 or more Radiation Environment Monitor (REM) units, each of which will contain a Medipix2 TimePix-based detector assembly, on the International Space Station (ISS) during the spring of 2012 as part of a Station Detailed Test Objective (SDTO). These units will be mounted on a single 8-layer printed circuit board containing a USB-based interface. The entire unit will have the form of a typical USB flash-memory device, and the USB interface will provide interactive control and data readout as well as the operating power. Each of the units will be separately plugged into one of the 21 Lenovo? T-61B laptops thatare currently onboard the ISS. The purpose of this test is to acquire initial on-orbit data to allow feedback into the design of the next generation of Medipix device, which is intended to support the development of a portable, standalon

Druh

D - Stať ve sborníku

CEP obor

JV - Kosmické technologie

OECD FORD obor

—

Projekt

<a href="/cs/project/LA08015" target="_blank" >LA08015: Spolupráce ČR s CERN</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

2012 IEEE Aerospace Conference Proceedings

ISBN

978-1-4577-0557-1

ISSN

1095-323X

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

IEEE

Místo vydání

New York

Místo konání akce

Big Sky, MT

Datum konání akce

3. 3. 2012

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000309105300018