Reologické chování PP/PET a modifikovaných PP/PET směsí. II. Dynamické viskoelastické vlastnosti.
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F04%3A63502768" target="_blank" >RIV/70883521:28110/04:63502768 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Rheological Behaviour of PP/PET and Modified PP/PET Blends. II. Dynamic Viscoelastic Properties.
Popis výsledku v původním jazyce
The intention of this paper is to investigate dynamic viscoelastic properties of unmodified and modified PP/PET blends. To study the effect of matrix, three polypropylenes differing in flow properties were chosen. The compatibilisation was carried out byboth one- or two-step reactive in situ techniques. In the former case, the addition of 1 wt.% of maleic anhydride (MA), and in the latter, polypropylene supplied as already modified by the producer were employed. The positive effect of compatibilisationcan be concluded not only from the results of the morphological study (dispersed phase size reduction, strengthened interfacial adhesion), but also through increased values of viscous and elastic characteristics, which suggests enhanced interactions between the blend components. Comparing steady shear and dynamic viscoelastic properties, the various extent of deformation applied during both types of measurements leading to different material response should be considered.
Název v anglickém jazyce
Rheological Behaviour of PP/PET and Modified PP/PET Blends. II. Dynamic Viscoelastic Properties.
Popis výsledku anglicky
The intention of this paper is to investigate dynamic viscoelastic properties of unmodified and modified PP/PET blends. To study the effect of matrix, three polypropylenes differing in flow properties were chosen. The compatibilisation was carried out byboth one- or two-step reactive in situ techniques. In the former case, the addition of 1 wt.% of maleic anhydride (MA), and in the latter, polypropylene supplied as already modified by the producer were employed. The positive effect of compatibilisationcan be concluded not only from the results of the morphological study (dispersed phase size reduction, strengthened interfacial adhesion), but also through increased values of viscous and elastic characteristics, which suggests enhanced interactions between the blend components. Comparing steady shear and dynamic viscoelastic properties, the various extent of deformation applied during both types of measurements leading to different material response should be considered.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
CD - Makromolekulární chemie
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2004
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Polymers and Polymer Composites
ISSN
0967-3911
e-ISSN
—
Svazek periodika
12
Číslo periodika v rámci svazku
5
Stát vydavatele periodika
GB - Spojené království Velké Británie a Severního Irska
Počet stran výsledku
15
Strana od-do
433-447
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—