Properties enhancement of partially biodegradable polyamide/polylactide blends through compatibilization with novel polyalkenyl-poly-maleic-anhydride- amide/imide-based additives

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F12%3A43867818" target="_blank" >RIV/70883521:28110/12:43867818 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28610/12:43867818

Výsledek na webu

<a href="http://dx.doi.org/10.1177/0731684411434150" target="_blank" >http://dx.doi.org/10.1177/0731684411434150</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1177/0731684411434150" target="_blank" >10.1177/0731684411434150</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Properties enhancement of partially biodegradable polyamide/polylactide blends through compatibilization with novel polyalkenyl-poly-maleic-anhydride- amide/imide-based additives

Popis výsledku v původním jazyce

This work is dedicated to compatibilization process investigation between polyamide 6 and biodegradable polylactide. The process was conducted by newly developed polyalkenyl-poly-maleic-anhydride-imide/amide agents over a selected range of composition toidentify morphologies and properties of these blends. The properties of resulted blends were studied by scanning electron microscopy, solvent extraction techniques, mechanical testing, Fourier transform infrared spectroscopy, and differential scanning calorimetry measurements. Results show that blending of the two polymers without compatibilizers produced multiphase blends. It was shown by scanning electron microscopy imaging that addition of prepared compatibilizers reduced a domain size of a dispersed phase and also changes in nearly co-continuous state occurred. Static and dynamic mechanical properties were improved, and especially impact strength and tensile strength were the most sensitive on the presence of compatibilizers.

Název v anglickém jazyce

Properties enhancement of partially biodegradable polyamide/polylactide blends through compatibilization with novel polyalkenyl-poly-maleic-anhydride- amide/imide-based additives

Popis výsledku anglicky

This work is dedicated to compatibilization process investigation between polyamide 6 and biodegradable polylactide. The process was conducted by newly developed polyalkenyl-poly-maleic-anhydride-imide/amide agents over a selected range of composition toidentify morphologies and properties of these blends. The properties of resulted blends were studied by scanning electron microscopy, solvent extraction techniques, mechanical testing, Fourier transform infrared spectroscopy, and differential scanning calorimetry measurements. Results show that blending of the two polymers without compatibilizers produced multiphase blends. It was shown by scanning electron microscopy imaging that addition of prepared compatibilizers reduced a domain size of a dispersed phase and also changes in nearly co-continuous state occurred. Static and dynamic mechanical properties were improved, and especially impact strength and tensile strength were the most sensitive on the presence of compatibilizers.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CD - Makromolekulární chemie

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Reinforced Plastics & Composites

ISSN

0731-6844

e-ISSN

—

Svazek periodika

31

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

14

Strana od-do

189-202

Kód UT WoS článku

000299997600007

EID výsledku v databázi Scopus

—