CAM in the production of casting patterns

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F12%3A43867925" target="_blank" >RIV/70883521:28110/12:43867925 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

CAM in the production of casting patterns

Popis výsledku v původním jazyce

The article is focused on the production of permanent casting patterns from wood for impermanent moulds by the 5-axis machining centre. Programming of casting pattern was dealt with CAM software by two different manufacturers. Casting pattern, adapted byappropriate allowances, was loaded in the SolidCAM R10 and the CAM Express 7.5 by Siemens. Ergonomics in the working environment of programmes, operation verifications and theoretical machine time were compared. The casting pattern was machined after generating the NC code on FC3800 MACH milling machine. Monitored parameters during computer programming were associated with the measured values when machining casting pattern. Estimated parameters between the computer simulations differed minimally in general, although the programming methods of cutting operations were different. Considerable differences, as expected, were observed in the values of estimated and actual machine time.

Název v anglickém jazyce

CAM in the production of casting patterns

Popis výsledku anglicky

The article is focused on the production of permanent casting patterns from wood for impermanent moulds by the 5-axis machining centre. Programming of casting pattern was dealt with CAM software by two different manufacturers. Casting pattern, adapted byappropriate allowances, was loaded in the SolidCAM R10 and the CAM Express 7.5 by Siemens. Ergonomics in the working environment of programmes, operation verifications and theoretical machine time were compared. The casting pattern was machined after generating the NC code on FC3800 MACH milling machine. Monitored parameters during computer programming were associated with the measured values when machining casting pattern. Estimated parameters between the computer simulations differed minimally in general, although the programming methods of cutting operations were different. Considerable differences, as expected, were observed in the values of estimated and actual machine time.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

12

Číslo periodika v rámci svazku

June 2012

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

6

Strana od-do

7-12

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—