Vše

Co hledáte?

Vše
Projekty
Výsledky výzkumu
Subjekty

Rychlé hledání

  • Projekty podpořené TA ČR
  • Významné projekty
  • Projekty s nejvyšší státní podporou
  • Aktuálně běžící projekty

Chytré vyhledávání

  • Takto najdu konkrétní +slovo
  • Takto z výsledků -slovo zcela vynechám
  • “Takto můžu najít celou frázi”

Mold Design for Rings of External Fixator

Identifikátory výsledku

  • Kód výsledku v IS VaVaI

    <a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F17%3A63517350" target="_blank" >RIV/70883521:28110/17:63517350 - isvavai.cz</a>

  • Výsledek na webu

  • DOI - Digital Object Identifier

Alternativní jazyky

  • Jazyk výsledku

    angličtina

  • Název v původním jazyce

    Mold Design for Rings of External Fixator

  • Popis výsledku v původním jazyce

    This paper deals with a structural design of a mold for making a composite ring of external circular fixator used in medical applications. It also focuses on the choice of technology and material for the production of a fixator ring. Due to the high demands on the quality, appearance, material of the product and higher series production, autoclaving was chosen for this purpose. Thanks to this sophisticated production process, the high quality and accuracy of the ring can be achieved. The starting material for the production of composite components is a layer of resin-saturated fibers, abbreviated prepreg. This blank is cut on a CNC plotter and embedded into a mold for molding. The mold is provided with a separator and a filler of pores. The resulting surface quality of the product then depends on the surface of the mold, the selection and the careful application of the separator (gelcoat), which also affects the life of the mold. For easier machining, aluminum was chosen as the material of the mold. The result of this contribution is the choice of the material of the product, the appropriate technological process and the design of the mold to obtain the resulting product which meets the required mechanical properties, appearance and functionality requirements.

  • Název v anglickém jazyce

    Mold Design for Rings of External Fixator

  • Popis výsledku anglicky

    This paper deals with a structural design of a mold for making a composite ring of external circular fixator used in medical applications. It also focuses on the choice of technology and material for the production of a fixator ring. Due to the high demands on the quality, appearance, material of the product and higher series production, autoclaving was chosen for this purpose. Thanks to this sophisticated production process, the high quality and accuracy of the ring can be achieved. The starting material for the production of composite components is a layer of resin-saturated fibers, abbreviated prepreg. This blank is cut on a CNC plotter and embedded into a mold for molding. The mold is provided with a separator and a filler of pores. The resulting surface quality of the product then depends on the surface of the mold, the selection and the careful application of the separator (gelcoat), which also affects the life of the mold. For easier machining, aluminum was chosen as the material of the mold. The result of this contribution is the choice of the material of the product, the appropriate technological process and the design of the mold to obtain the resulting product which meets the required mechanical properties, appearance and functionality requirements.

Klasifikace

  • Druh

    O - Ostatní výsledky

  • CEP obor

  • OECD FORD obor

    20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Návaznosti výsledku

  • Projekt

  • Návaznosti

    V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Ostatní

  • Rok uplatnění

    2017

  • Kód důvěrnosti údajů

    S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů