Tensile impact behaviour of 3D printed parts on FFF/FDM printer Zortrax M200

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F18%3A63520238" target="_blank" >RIV/70883521:28110/18:63520238 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28140/18:63520238

Výsledek na webu

<a href="https://www.matec-conferences.org/articles/matecconf/pdf/2018/69/matecconf_cscc2018_04049.pdf" target="_blank" >https://www.matec-conferences.org/articles/matecconf/pdf/2018/69/matecconf_cscc2018_04049.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1051/matecconf/201821004049" target="_blank" >10.1051/matecconf/201821004049</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Tensile impact behaviour of 3D printed parts on FFF/FDM printer Zortrax M200

Popis výsledku v původním jazyce

To obtain the deeper knowledge about the mechanical behaviour of 3D printed polymeric materials it is necessary to study the material properties from the beginning to the end. The commonly processed polymeric materials (via injection moulding etc.) are already deeply studied and evaluated, but 3D printed specimens in the various orientation build are not yet. In this study the tensile impact test specimens were fabricated via a desktop material extrusion 3D printer Zortrax M200 processing ABS and HIPS in build orientation XY. The 3D printed tensile impact test specimens were examined to compare the effect of layer thickness. Impact pendulum Zwick HIT50P was used for tensile impact tests according to ISO 8256 standard. Optical microscopy was utilized to perform fractography on impact test specimens to explore the effect of the layer thickness on the fracture surface morphology of the failed specimens. This study demonstrates the need for material testing for specific processing as additive manufacturing technologies.

Název v anglickém jazyce

Tensile impact behaviour of 3D printed parts on FFF/FDM printer Zortrax M200

Popis výsledku anglicky

To obtain the deeper knowledge about the mechanical behaviour of 3D printed polymeric materials it is necessary to study the material properties from the beginning to the end. The commonly processed polymeric materials (via injection moulding etc.) are already deeply studied and evaluated, but 3D printed specimens in the various orientation build are not yet. In this study the tensile impact test specimens were fabricated via a desktop material extrusion 3D printer Zortrax M200 processing ABS and HIPS in build orientation XY. The 3D printed tensile impact test specimens were examined to compare the effect of layer thickness. Impact pendulum Zwick HIT50P was used for tensile impact tests according to ISO 8256 standard. Optical microscopy was utilized to perform fractography on impact test specimens to explore the effect of the layer thickness on the fracture surface morphology of the failed specimens. This study demonstrates the need for material testing for specific processing as additive manufacturing technologies.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

MATEC Web of Conferences

ISBN

—

ISSN

2261-236X

e-ISSN

2261-236X

Počet stran výsledku

5

Strana od-do

"nestrankovano"

Název nakladatele

EDP Sciences

Místo vydání

Les Ulis

Místo konání akce

Majorca

Datum konání akce

14. 7. 2018

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—