The influence of finishing operations on the surface quality of injected parts

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F19%3A63522849" target="_blank" >RIV/70883521:28110/19:63522849 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28140/19:63522849

Výsledek na webu

<a href="https://arl.ujep.cz/arl-ujep/cs/detail-ujep_us_cat-0273426-The-influence-of-finishing-operations-on-the-surface-quality-of-injected-parts/" target="_blank" >https://arl.ujep.cz/arl-ujep/cs/detail-ujep_us_cat-0273426-The-influence-of-finishing-operations-on-the-surface-quality-of-injected-parts/</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/315.2019/a/1213-2489/MT/19/3/477" target="_blank" >10.21062/ujep/315.2019/a/1213-2489/MT/19/3/477</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The influence of finishing operations on the surface quality of injected parts

Popis výsledku v původním jazyce

n the production of plastics tools, due to the high mould price, high demands are placed on cost reduction or shortening mould production times. The price of the injection mould is reflected not only in the price of used injection material but also in the price of its own production. Mould form cavities were made with different materials and different machining technology (finishing methods). Various polymeric materials were injected into the cavities thus prepared, and the surface quality of the samples was evaluated and compared to the quality of the surface cavities, thereby verifying the copying of the surface of the mould cavity onto the surface of the polymer product. The aim of this article is to determine the impact of technological conditions on the quality of the plastic tool (injection mould) and the future polymer product. In this experiment, they were made by different technological conditions of the shape cavity and their influence on the resulting roughness parameters of tested samples was determined.

Název v anglickém jazyce

The influence of finishing operations on the surface quality of injected parts

Popis výsledku anglicky

n the production of plastics tools, due to the high mould price, high demands are placed on cost reduction or shortening mould production times. The price of the injection mould is reflected not only in the price of used injection material but also in the price of its own production. Mould form cavities were made with different materials and different machining technology (finishing methods). Various polymeric materials were injected into the cavities thus prepared, and the surface quality of the samples was evaluated and compared to the quality of the surface cavities, thereby verifying the copying of the surface of the mould cavity onto the surface of the polymer product. The aim of this article is to determine the impact of technological conditions on the quality of the plastic tool (injection mould) and the future polymer product. In this experiment, they were made by different technological conditions of the shape cavity and their influence on the resulting roughness parameters of tested samples was determined.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

19

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

477-481

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85069841810