Polymer flow influenced by mold cavity surface roughness

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F19%3A63522857" target="_blank" >RIV/70883521:28110/19:63522857 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28140/19:63522857

Výsledek na webu

<a href="https://arl.ujep.cz/arl-ujep/cs/csg/?repo=ujeprepo&key=79455470561" target="_blank" >https://arl.ujep.cz/arl-ujep/cs/csg/?repo=ujeprepo&key=79455470561</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/291.2019/a/1213-2489/mt/19/2/327" target="_blank" >10.21062/ujep/291.2019/a/1213-2489/mt/19/2/327</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Polymer flow influenced by mold cavity surface roughness

Popis výsledku v původním jazyce

Polymer injection molding is the most used technology of polymer processing nowadays. It enables the manufacture of final products, which do not require any further operations. Working of shaping cavities is the major problem involving not only the cavity of the mold itself, giving the shape and dimensions of the future product, but also the flow pathway (runners) leading the polymer melt to the separate cavities. This paper shows the influence of cavity surface roughness, polymer material (with different flow properties) and technological parameters on the flow length of polymers into mold cavity. Application of the measured results may have significant influence on the production of shaping parts of the injection molds especially in changing the so far used processes and substituting them by less less expensive production processes which might increase the competitiveness of the tool producers and shorten the time between product plan and its implementation.

Název v anglickém jazyce

Polymer flow influenced by mold cavity surface roughness

Popis výsledku anglicky

Polymer injection molding is the most used technology of polymer processing nowadays. It enables the manufacture of final products, which do not require any further operations. Working of shaping cavities is the major problem involving not only the cavity of the mold itself, giving the shape and dimensions of the future product, but also the flow pathway (runners) leading the polymer melt to the separate cavities. This paper shows the influence of cavity surface roughness, polymer material (with different flow properties) and technological parameters on the flow length of polymers into mold cavity. Application of the measured results may have significant influence on the production of shaping parts of the injection molds especially in changing the so far used processes and substituting them by less less expensive production processes which might increase the competitiveness of the tool producers and shorten the time between product plan and its implementation.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20302 - Applied mechanics

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

19

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

327-331

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85065420147