Analysis of extrusion process parameters in PLA filament production for FFF technology

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F24%3A63579960" target="_blank" >RIV/70883521:28110/24:63579960 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28140/24:63579960

Výsledek na webu

<a href="https://journalmt.com/artkey/mft-202402-0016_analysis-of-extrusion-process-parameters-in-pla-filament-production-for-fff-technology.php" target="_blank" >https://journalmt.com/artkey/mft-202402-0016_analysis-of-extrusion-process-parameters-in-pla-filament-production-for-fff-technology.php</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/mft.2024.037" target="_blank" >10.21062/mft.2024.037</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Analysis of extrusion process parameters in PLA filament production for FFF technology

Popis výsledku v původním jazyce

Additive technologies are becoming a common part of not only prototype production, but also piece or small series production. However, the choice of technology and material plays a key role in the applicability of the manufactured parts. The most widespread type of additive technology is FFF technology, which consists of applying a fused plastic string in single layers. The resulting mechanical properties of parts produced using this technology depend not only on the material and structure selected, but also on the process parameters used in the printing process itself. This study deals with the production of filament from PLA, which is the primary material. The advantage is its environmental degradability after the end of the life cycle of PLA products. However, the resulting properties of the printed parts may depend on the way the filament is prepared and in particular on the melt temperature during filament extrusion. This study investigates the effect of the produced filaments on the quality of printed parts. It has been shown that the filament production technology has a significant effect on the quality of printed parts.

Název v anglickém jazyce

Analysis of extrusion process parameters in PLA filament production for FFF technology

Popis výsledku anglicky

Additive technologies are becoming a common part of not only prototype production, but also piece or small series production. However, the choice of technology and material plays a key role in the applicability of the manufactured parts. The most widespread type of additive technology is FFF technology, which consists of applying a fused plastic string in single layers. The resulting mechanical properties of parts produced using this technology depend not only on the material and structure selected, but also on the process parameters used in the printing process itself. This study deals with the production of filament from PLA, which is the primary material. The advantage is its environmental degradability after the end of the life cycle of PLA products. However, the resulting properties of the printed parts may depend on the way the filament is prepared and in particular on the melt temperature during filament extrusion. This study investigates the effect of the produced filaments on the quality of printed parts. It has been shown that the filament production technology has a significant effect on the quality of printed parts.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

2787-9402

Svazek periodika

24

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

265-271

Kód UT WoS článku

001209905400011

EID výsledku v databázi Scopus

2-s2.0-85193745572