Low-cost Rectifier for Measuring of AC Voltage or Current Frequency Compensation Proposal
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28140%2F12%3A43868725" target="_blank" >RIV/70883521:28140/12:43868725 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Low-cost Rectifier for Measuring of AC Voltage or Current Frequency Compensation Proposal
Popis výsledku v původním jazyce
Usually the rectifiers are the most problematic devices of the low-cost measurement instruments. The features of a simple full wave rectifier construction with an operational amplifier are usually determined by the rectifying diodes and the slew rate ofthe operational amplifier and unfortunately, they suffer from the dependence on the amplitude of the measured signal. Of course, special topologies as well as current-mode operating devices can be used, but this paper considers the possibility of how thefrequency range of a cheap conventional rectifier can be broadened. It is supposed that the rectifier operates on a single signal level at which it can be well frequency compensated. The measurement is processed indirectly by a microcontroller that changes the amplification factor of a preamplifier in order the target level was achieved. Subsequently the measured value is computed from the amplification factor required to achieve the target level. However, this approach, although it loo
Název v anglickém jazyce
Low-cost Rectifier for Measuring of AC Voltage or Current Frequency Compensation Proposal
Popis výsledku anglicky
Usually the rectifiers are the most problematic devices of the low-cost measurement instruments. The features of a simple full wave rectifier construction with an operational amplifier are usually determined by the rectifying diodes and the slew rate ofthe operational amplifier and unfortunately, they suffer from the dependence on the amplitude of the measured signal. Of course, special topologies as well as current-mode operating devices can be used, but this paper considers the possibility of how thefrequency range of a cheap conventional rectifier can be broadened. It is supposed that the rectifier operates on a single signal level at which it can be well frequency compensated. The measurement is processed indirectly by a microcontroller that changes the amplification factor of a preamplifier in order the target level was achieved. Subsequently the measured value is computed from the amplification factor required to achieve the target level. However, this approach, although it loo
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JA - Elektronika a optoelektronika, elektrotechnika
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/ED2.1.00%2F03.0089" target="_blank" >ED2.1.00/03.0089: Centrum bezpečnostních, informačních a pokročilých technologií (CEBIA-Tech)</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2012
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
International Journal of Circuits, Systems and Signal Processing
ISSN
1998-4464
e-ISSN
—
Svazek periodika
6
Číslo periodika v rámci svazku
6
Stát vydavatele periodika
GB - Spojené království Velké Británie a Severního Irska
Počet stran výsledku
8
Strana od-do
394 - 401
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—