Heat transfer by Forced Convection from a Vertical PCM Plate

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28140%2F16%3A43874716" target="_blank" >RIV/70883521:28140/16:43874716 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Heat transfer by Forced Convection from a Vertical PCM Plate

Popis výsledku v původním jazyce

The article describes the possibility to obtain stored energy from PCM materials by using forced convection. The PCMs are very popular in many different applications for temperature stabilization of the microclimate inside buildings. The acceleration of releasing the stored energy is important for discharging cycle, which is very difficult to achieve because of the supercooling effect. Forced convection was used as an option for speeding-up the energy release. It is important to know some of the simple relations in fluid dynamics and boundary layer analysis to understand the forced convection heat transfer. Thermal imager was used for visualization of stored energy release. The paper also focuses on boundary layer with forced convection and the flow visualization around the surface of the vertical plate. It is possible to use the stored energy within several cycles. This energy can be used in various ways, such as a device with intermittent heating and cooling equipment. The aim is to develop a device which can be used for cooling or maintaining steady thermal conditions.

Název v anglickém jazyce

Heat transfer by Forced Convection from a Vertical PCM Plate

Popis výsledku anglicky

The article describes the possibility to obtain stored energy from PCM materials by using forced convection. The PCMs are very popular in many different applications for temperature stabilization of the microclimate inside buildings. The acceleration of releasing the stored energy is important for discharging cycle, which is very difficult to achieve because of the supercooling effect. Forced convection was used as an option for speeding-up the energy release. It is important to know some of the simple relations in fluid dynamics and boundary layer analysis to understand the forced convection heat transfer. Thermal imager was used for visualization of stored energy release. The paper also focuses on boundary layer with forced convection and the flow visualization around the surface of the vertical plate. It is possible to use the stored energy within several cycles. This energy can be used in various ways, such as a device with intermittent heating and cooling equipment. The aim is to develop a device which can be used for cooling or maintaining steady thermal conditions.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

BK - Mechanika tekutin

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

WSEAS Transactions on Heat and Mass Transfer

ISSN

1790-5044

e-ISSN

—

Svazek periodika

2016

Číslo periodika v rámci svazku

11

Stát vydavatele periodika

GR - Řecká republika

Počet stran výsledku

6

Strana od-do

56-61

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—