Method of device diagnostics, operating status logging and configuration changes

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28140%2F19%3A63523151" target="_blank" >RIV/70883521:28140/19:63523151 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2019/141.pdf" target="_blank" >https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2019/141.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.2507/30th.daaam.proceedings.141" target="_blank" >10.2507/30th.daaam.proceedings.141</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Method of device diagnostics, operating status logging and configuration changes

Popis výsledku v původním jazyce

The aim of this research is to design a suitable design for a diagnostic device that will periodically monitor and record selected quantities in the device. The diagnostic equipment must be as flexible as possible, as the design will be applicable to all output electronic equipment of this project. This means that the diagnostic design can be applied to all control units, add-on modules or turnstile controllers. Each checked element contains different quantities that are valid for correct diagnostics. Therefore, there is a desire for a uniform design that can be customized based on the device. The data itself should include the exact time and date the measurement occurred. This information should be kept for several years for back diagnosis. Furthermore, the data should be stored primarily on the device with the possibility to transfer it to the PC via the given interface. Baseline states should be available directly on the device for immediate status. This information will be displayed via a small integrated display directly on the PCB. The data itself should be stored on a medium that retains the information even when the power supply is interrupted. The diagnostic part itself should be equipped with a backup battery, which will be functional even after the failure of the primary power supply for possible failure diagnosis. The design should consist of a microcomputer that will record events that can be updated with firmware to accommodate the board&apos;s needs. A simple program that visualizes the data for easier diagnostics will be needed to view the recorded data more easily.

Název v anglickém jazyce

Method of device diagnostics, operating status logging and configuration changes

Popis výsledku anglicky

The aim of this research is to design a suitable design for a diagnostic device that will periodically monitor and record selected quantities in the device. The diagnostic equipment must be as flexible as possible, as the design will be applicable to all output electronic equipment of this project. This means that the diagnostic design can be applied to all control units, add-on modules or turnstile controllers. Each checked element contains different quantities that are valid for correct diagnostics. Therefore, there is a desire for a uniform design that can be customized based on the device. The data itself should include the exact time and date the measurement occurred. This information should be kept for several years for back diagnosis. Furthermore, the data should be stored primarily on the device with the possibility to transfer it to the PC via the given interface. Baseline states should be available directly on the device for immediate status. This information will be displayed via a small integrated display directly on the PCB. The data itself should be stored on a medium that retains the information even when the power supply is interrupted. The diagnostic part itself should be equipped with a backup battery, which will be functional even after the failure of the primary power supply for possible failure diagnosis. The design should consist of a microcomputer that will record events that can be updated with firmware to accommodate the board&apos;s needs. A simple program that visualizes the data for easier diagnostics will be needed to view the recorded data more easily.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

10201 - Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Annals of DAAAM and Proceedings of the International DAAAM Symposium

ISBN

—

ISSN

17269679

e-ISSN

—

Počet stran výsledku

5

Strana od-do

1014-1018

Název nakladatele

Danube Adria Association for Automation and Manufacturing ( DAAAM )

Místo vydání

Vídeň

Místo konání akce

Zadar

Datum konání akce

23. 10. 2019

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—