Engineering conductivity and performance in electrorheological fluids using a nanosilica grafting approach
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28610%2F23%3A63569019" target="_blank" >RIV/70883521:28610/23:63569019 - isvavai.cz</a>
Výsledek na webu
<a href="https://pubs.acs.org/doi/10.1021/acsanm.3c01475" target="_blank" >https://pubs.acs.org/doi/10.1021/acsanm.3c01475</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1021/acsanm.3c01475" target="_blank" >10.1021/acsanm.3c01475</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Engineering conductivity and performance in electrorheological fluids using a nanosilica grafting approach
Popis výsledku v původním jazyce
Carbonization is considered an effective process for the preparation of carbon-rich solids for various applications. Raw carbonaceous particles however often possess high electrical conductivity, limiting their applicability in electrorheology. To address this drawback, the carbonaceous particles prepared from glucose through hydrothermal synthesis, followed by thermal carbonization in an inert atmosphere, were subsequently coated by compact and mesoporous nanosilica, giving rise to semiconducting particles. The successful coating was confirmed using transmission electron microscopy and spectroscopic analysis, and the composite particles were further used as a dispersed phase in electrorheological (ER) fluids of concentration 5 wt %. While an ER fluid based on pure carbonized particles caused a short circuit of the measuring device at the electric field of intensity 1 kV mm-1, the ER behavior of its analogue based on mesoporous silica-coated particles was successfully measured up to 3 kV mm-1, giving a high yield stress exceeding even the values estimated for ER fluids based on similar carbonaceous particles coated with a compact silica layer. Even though the conductivity decreased only about one order of magnitude after the coating process, the dielectric properties of the prepared ER fluid differed significantly, the relaxation process was shifted to lower frequencies, and most importantly, the dielectric relaxation strength increased, indicating an increased amount of interactions. The presence of mesoporous nanosilica further enhanced the sedimentation stability of the ER fluids when compared to its analogue with the compact silica coating, expanding the scope of practical applicability.
Název v anglickém jazyce
Engineering conductivity and performance in electrorheological fluids using a nanosilica grafting approach
Popis výsledku anglicky
Carbonization is considered an effective process for the preparation of carbon-rich solids for various applications. Raw carbonaceous particles however often possess high electrical conductivity, limiting their applicability in electrorheology. To address this drawback, the carbonaceous particles prepared from glucose through hydrothermal synthesis, followed by thermal carbonization in an inert atmosphere, were subsequently coated by compact and mesoporous nanosilica, giving rise to semiconducting particles. The successful coating was confirmed using transmission electron microscopy and spectroscopic analysis, and the composite particles were further used as a dispersed phase in electrorheological (ER) fluids of concentration 5 wt %. While an ER fluid based on pure carbonized particles caused a short circuit of the measuring device at the electric field of intensity 1 kV mm-1, the ER behavior of its analogue based on mesoporous silica-coated particles was successfully measured up to 3 kV mm-1, giving a high yield stress exceeding even the values estimated for ER fluids based on similar carbonaceous particles coated with a compact silica layer. Even though the conductivity decreased only about one order of magnitude after the coating process, the dielectric properties of the prepared ER fluid differed significantly, the relaxation process was shifted to lower frequencies, and most importantly, the dielectric relaxation strength increased, indicating an increased amount of interactions. The presence of mesoporous nanosilica further enhanced the sedimentation stability of the ER fluids when compared to its analogue with the compact silica coating, expanding the scope of practical applicability.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20501 - Materials engineering
Návaznosti výsledku
Projekt
—
Návaznosti
V - Vyzkumna aktivita podporovana z jinych verejnych zdroju
Ostatní
Rok uplatnění
2023
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
ACS Applied Nano Materials
ISSN
2574-0970
e-ISSN
—
Svazek periodika
6
Číslo periodika v rámci svazku
11
Stát vydavatele periodika
US - Spojené státy americké
Počet stran výsledku
9
Strana od-do
9768-9776
Kód UT WoS článku
001005177800001
EID výsledku v databázi Scopus
2-s2.0-85162865887