Filtry
Tracer migration parameters for low porosity crystalline rocks
Diffusivity, permeability and porosity in low porosity crystalline rock are studied in order to assess data set that can be used for safety assessment of deep geological repository of radionuclide waste....
DL - Jaderné odpady, radioaktivní znečištění a kontrola
- 2012 •
- O
Rok uplatnění
O - Ostatní výsledky
Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings
residual stresses, small oxide content and low hardness. The porosity is high and the fraction of connected pores are low. The small porosity produces a relatively large due to low porosity and h...
JG - Hutnictví, kovové materiály
- 2006 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
The change of porosity of the layerof plastics particles molded by low pressure (laboratory simulation of technology TERMOFIX)
The porosity of the layer of particles of plasticised PVC molded on laboratory device for simulation of technology TERMOFIX was expressed as time dependent from measured hight of molded layer....
CD - Makromolekulární chemie
- 2003 •
- D
Rok uplatnění
D - Stať ve sborníku
Testing of porosity of organic coatings by low- and high- voltage methods
The pores in organic coatings are reason of lower service life of surface treatment. Test is performed in special cases of organic coating exposure in liquid environments of for structures burried in soil. There are used low- or high-voltage...
JK - Koroze a povrchové úpravy materiálu
- 2008 •
- D
Rok uplatnění
D - Stať ve sborníku
High Strength Concrete with Low Porosity
JN - Stavebnictví
- 1995 •
- X
Rok uplatnění
X - Nezařazeno
Conductivity and Young's modulus of porous metamaterials based on Gibson-Ashby cells
on Gibson-Ashby cells have been calculated numerically. It is shown that the porosity foams, although the latter have been derived on the basis of this model. For low-porosity metamaterials with porosity 0.016 the...
Ceramics
- 2019 •
- Jimp •
- Odkaz
Rok uplatnění
Jimp - Článek v periodiku v databázi Web of Science
Výsledek na webu
Relation betwen Porosity and Mechanical Properties of Al-Si Alloys Produced by Low-Pressure Casting
The aim of the research was to evaluate influence of porosity size) were used forthe analysis. They were casted using low-pressure casting technology. Since the negative influence of porosity on mechanical properties of Al ...
JG - Hutnictví, kovové materiály
- 2014 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
POROSITY OF METALLURGICAL SINTER AS AN INDICATOR OF IRON ORE REDUCIBILITY
of samples with high and low reducibility. The effect of porosity on reducibilityThe paper deals with porosity of metallurgical sinter. It is aimed at the research on relation between porosity and reducibility of ...
Chemical process engineering
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
Measurement of low porosity of light alloys using eddy currents on as-machined areas
of non-destructive porosity measurement in extent about 20 %. Prediction with constant porosity in the whole volume. This work evaluates extent of porosity using non-destructive method of eddy currents and miacroscopy quan...
JS - Řízení spolehlivosti a kvality, zkušebnictví
- 2013 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
The Influence of Porosity on Mechanical Properties of Casts Produced from Al - Si Alloys
The aim of the research was to evaluate influence of porosity size production) were used. They were casted employing low-pressure casting technology. Since the negative influence of porosity on mechanical properties of Al a...
JG - Hutnictví, kovové materiály
- 2013 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
- 1 - 10 z 71 303