Power Consumption during Edge Milling of Medium-Density Fiberboard and Edge-Glued Panel

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F17%3A74867" target="_blank" >RIV/60460709:41320/17:74867 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Power Consumption during Edge Milling of Medium-Density Fiberboard and Edge-Glued Panel

Original language description

This paper presents the energy consumption differences during the edge milling of various board materials (medium-density fiberboard (MDF), medium-density fiberboard with single-sided lamination (MDF-L), and spruce edge-glued panel (SEGP)). The edge milling was carried out with various parameters: feed rate (4, 8, and 11 m/min), cutting speed (20, 30, 40, and 60 m/s), and blade type (tungsten carbide HW1, HW2, and HW1 coated with CrTiN (HW1 + CrTiN)). The results indicated that the increase in the cutting speed and feed rate cause the increase in cutting power. The highest cutting power values were observed with the milling of MDF, slightly lower values were observed with MDF-L, and the lowest values were observed with SEGP. Very similar cutting power values during milling were noted with HW1 and HW2 blades, whereas milling with the HW1 + CrTiN resulted in slightly higher values (e.g., 1% higher).

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20502 - Paper and wood

Project

<a href="/en/project/QJ1330233" target="_blank" >QJ1330233: The preparation of legislative, forest and game management, silviculture and forest protection frameworks as a toll of adaptation of forestry to changes of natural and socio-economic conditions</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Publication year

2017

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

BioResources

ISSN

1930-2126

e-ISSN

—

Volume of the periodical

12

Issue of the periodical within the volume

4

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

14

Pages from-to

7413-7426

UT code for WoS article

000422879900038

EID of the result in the Scopus database

2-s2.0-85032681150