MEDIUM-DENSITY FIBERBOARD AND EDGE-GLUED PANEL AFTER EDGE MILLING - SURFACE WAVINESS AFTER MACHINING WITH DIFFERENT PARAMETERS MEASURED BY CONTACT AND CONTACTLESS METHOD
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F18%3A78598" target="_blank" >RIV/60460709:41320/18:78598 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
MEDIUM-DENSITY FIBERBOARD AND EDGE-GLUED PANEL AFTER EDGE MILLING - SURFACE WAVINESS AFTER MACHINING WITH DIFFERENT PARAMETERS MEASURED BY CONTACT AND CONTACTLESS METHOD
Original language description
This article deals with the quality of the milled surface of board edges. The quality is evaluated using the Wa (mean arithmetic deviation of the surface waviness). The Wa was measured by two methods (contact and contactless). Form Talysurf 50 Intra was used for the contact method, and the LEXT 3D measuring laser microscope OLS4100 was used for the contactless method. The variable factors whose effect on the resulting waviness was determined were the machined material, milling cutters, cutting speed and feed rate. The boards used were mediumdensity fiberboard, medium-density fiberboard with single-sided lamination and spruce edgeglued panel. Three different cutters were used for the milling, all of which were made of sintered carbide, and one of them was coated (CrTiN). The cutting speeds were 20, 30, 40 and 60 m.s(-1), and the feed rates were 4, 8 and 11 m.min(-1). All the above-mentioned factors as well as their mutual interaction had an effect on the waviness. There was no significant differ
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20502 - Paper and wood
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2018
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Wood Research
ISSN
1336-4561
e-ISSN
—
Volume of the periodical
63
Issue of the periodical within the volume
4
Country of publishing house
SK - SLOVAKIA
Number of pages
15
Pages from-to
683-697
UT code for WoS article
000443173100013
EID of the result in the Scopus database
2-s2.0-85052953623