Medium-density Fiberboard (MDF) and Edge-glued Panels (EGP) after Edge Milling - Surface Roughness after Machining with Different Parameters
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F18%3A77757" target="_blank" >RIV/60460709:41320/18:77757 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.13.1.2005-2021" target="_blank" >http://dx.doi.org/10.15376/biores.13.1.2005-2021</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.13.1.2005-2021" target="_blank" >10.15376/biores.13.1.2005-2021</a>
Alternative languages
Result language
angličtina
Original language name
Medium-density Fiberboard (MDF) and Edge-glued Panels (EGP) after Edge Milling - Surface Roughness after Machining with Different Parameters
Original language description
The mean arithmetic deviation of the roughness profile was investigated during cylindrical milling of the board edges. The machined materials were a medium-density fiberboard, medium-density fiberboard with single-sided lamination, and edge-glued spruce panel. Contactless and contact profilometers were used to measure the roughness. Both methods were evaluated and compared. Tungsten carbide blades with three different compositions and treatments were used. The effect of the cutting speed (20 m s, 30 m s, 40 m s, and 60 m s) and feed rate (4 m min, 8 m min, and 11 m min) on the surface roughness was also monitored. The results of this study compared two different methods for determining the surface roughness. The measurements were more accurate with a contactless profilometer, but the price is higher than that of the contact method. The operation was also more complicated, and the measurement itself took longer with a contactless profilometer. The evaluation of individual surface quality variables was
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20502 - Paper and wood
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2018
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
BioResources
ISSN
1930-2126
e-ISSN
—
Volume of the periodical
13
Issue of the periodical within the volume
1
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
17
Pages from-to
2005-2021
UT code for WoS article
000427790000143
EID of the result in the Scopus database
2-s2.0-85041290594