Surface Roughness of Medium-Density Fiberboard (MDF) and Edge-Glued Panel (EGP) After Edge Milling
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F17%3A74871" target="_blank" >RIV/60460709:41320/17:74871 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Surface Roughness of Medium-Density Fiberboard (MDF) and Edge-Glued Panel (EGP) After Edge Milling
Original language description
The mean arithmetic deviation of the roughness profile (Ra) was investigated for the edge surface after edge milling of medium-density fiberboard, medium-density fiberboard with single-sided lamination, and spruce edge-glued panel. Tungsten carbide blades with three different compositions and treatment (HW1, HW2, and HW1 + CrTiN coating) were used. During edge milling, the feed rate (4, 8, and 11 m/min) and cutting speed (20, 30, 40, and 60 m/s) were changed. The lowest roughness values were found in spruce timber, and the highest values were found in untreated MDF. The highest edge surface roughness was measured after using the HW2 tool. Slightly lower values were found using HW1 CrTiN, and the lowest values were found using HW1. Increasing the cutting speed led to a very slight increase in roughness. Increasing the feed rate had the same effect, but its effect was more significant. The article provides an understanding of the interaction of the most frequently occurring factors relative to the qual
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20502 - Paper and wood
Result continuities
Project
<a href="/en/project/QJ1330233" target="_blank" >QJ1330233: The preparation of legislative, forest and game management, silviculture and forest protection frameworks as a toll of adaptation of forestry to changes of natural and socio-economic conditions</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach
Others
Publication year
2017
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
BioResources
ISSN
1930-2126
e-ISSN
—
Volume of the periodical
12
Issue of the periodical within the volume
4
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
15
Pages from-to
8119-8133
UT code for WoS article
000422879900090
EID of the result in the Scopus database
2-s2.0-85032627737