A comparison of chemical and atmospheric plasma assisted copper plating on carbon fiber reinforced epoxy polymer surfaces

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216224%3A14310%2F14%3A00077334" target="_blank" >RIV/00216224:14310/14:00077334 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.surfcoat.2014.07.026" target="_blank" >http://dx.doi.org/10.1016/j.surfcoat.2014.07.026</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.surfcoat.2014.07.026" target="_blank" >10.1016/j.surfcoat.2014.07.026</a>

Jazyk výsledku

angličtina

Název v původním jazyce

A comparison of chemical and atmospheric plasma assisted copper plating on carbon fiber reinforced epoxy polymer surfaces

Popis výsledku v původním jazyce

In the present study a comparison of two different surface pre-treatments and their influence on a subsequent surface metallization were studied. Standard electroless copper deposition involving initial etching in mild acid is thoroughly compared with the process where plasma pre-treatment replaced the mild acid etch. Specific surface co-planar type of dielectric barrier discharge was employed. Results demonstrated both approaches being able to achieve excellent adhesion of final coating. In contrast tostandard chemical pre-treatment, plasma pre-treatment is associated with changes of initial composite surface chemistry only. XPS analysis revealed, that Pd atom on plasma treated surface takes the form of its oxide compounds PdO and PdO2 preferably, while its form on the surface of standard chemical pre-treatment is mostly metallic-Pd.

Název v anglickém jazyce

A comparison of chemical and atmospheric plasma assisted copper plating on carbon fiber reinforced epoxy polymer surfaces

Popis výsledku anglicky

In the present study a comparison of two different surface pre-treatments and their influence on a subsequent surface metallization were studied. Standard electroless copper deposition involving initial etching in mild acid is thoroughly compared with the process where plasma pre-treatment replaced the mild acid etch. Specific surface co-planar type of dielectric barrier discharge was employed. Results demonstrated both approaches being able to achieve excellent adhesion of final coating. In contrast tostandard chemical pre-treatment, plasma pre-treatment is associated with changes of initial composite surface chemistry only. XPS analysis revealed, that Pd atom on plasma treated surface takes the form of its oxide compounds PdO and PdO2 preferably, while its form on the surface of standard chemical pre-treatment is mostly metallic-Pd.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

BL - Fyzika plasmatu a výboje v plynech

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Surface and Coatings Technology

ISSN

0257-8972

e-ISSN

—

Svazek periodika

258

Číslo periodika v rámci svazku

November

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

8

Strana od-do

1082-1089

Kód UT WoS článku

000346895000132

EID výsledku v databázi Scopus

—