Vlastnosti alkalicky aktivovaných aluminosilikátových materiálů s žárovzdorným kamenivem po namáhání vysokými teplotami.
Popis výsledku
Granulovaná vysokopecní struska byla aktivována sušeným silikátem sodným a pro přípravu zkušebních těles byl použit elektroporcelán jako kamenivo. Tělesa byla po 28 dnech po výrobě podrobena zahřívání na teploty od 200 do 1200 st. Cels. s hodinovou výdrží na dané teplotě. Při teplotách 200 až 600 st. Cels. se snižují pevnosti na 80% původních. Další zvyšování tepelného namáhání způsobuje zvyšování pevností po ochlazení na laboratorní teplotu, a to až na dvojnásobek původních pevností. Vlastnosti tělespotepelném namáhání byla zkoumány rtuťovou porozimetrií, RTG difrakcí a elektronovým skenovacím mikroskopem. Výsledky zkoumání vlastností jsou popsány v článku.
Klíčová slova
Identifikátory výsledku
Kód výsledku v IS VaVaI
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Properties of alkali-activated aluminosilicate materials with fire-resistant aggregate after high temperature loading.
Popis výsledku v původním jazyce
The granulated blast furnace slag was activated with dried sodium silicate; the temperature-resistant electrical porcelain as an aggregate was used. Composite has been loaded at the temperature from 200 to 1200 dg. Cels. 28 days after the specimens had been prepared. The treatment to the temperature between 200 and 600 dg. Cels. caused the fallback of the strength to 80 % of the primary one. Further temperature elevation led to compression strength increase that was twice as high as the original strengtth. The properties of composites after temperature loading were investigated by mercury porosimetry, X-ray diffraction analysis and electron scanning microscopy. The mineralogical composition, microstructure, porosity, and comparison with specimens containing quartz aggregates are described.
Název v anglickém jazyce
Properties of alkali-activated aluminosilicate materials with fire-resistant aggregate after high temperature loading.
Popis výsledku anglicky
The granulated blast furnace slag was activated with dried sodium silicate; the temperature-resistant electrical porcelain as an aggregate was used. Composite has been loaded at the temperature from 200 to 1200 dg. Cels. 28 days after the specimens had been prepared. The treatment to the temperature between 200 and 600 dg. Cels. caused the fallback of the strength to 80 % of the primary one. Further temperature elevation led to compression strength increase that was twice as high as the original strengtth. The properties of composites after temperature loading were investigated by mercury porosimetry, X-ray diffraction analysis and electron scanning microscopy. The mineralogical composition, microstructure, porosity, and comparison with specimens containing quartz aggregates are described.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JN - Stavebnictví
OECD FORD obor
—
Návaznosti výsledku
Projekt
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2005
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Cement Combinations for Durable Concrete
ISBN
0-7277-3401-6
ISSN
—
e-ISSN
—
Počet stran výsledku
10
Strana od-do
277-286
Název nakladatele
—
Místo vydání
Dundee
Místo konání akce
Dundee, Scotland
Datum konání akce
5. 7. 2005
Typ akce podle státní příslušnosti
WRD - Celosvětová akce
Kód UT WoS článku
—
Základní informace
Druh výsledku
D - Stať ve sborníku
CEP
JN - Stavebnictví
Rok uplatnění
2005