Test of Adhesion and Shear Strength of Polyurethane Adhesives to Cement-bonded Particleboard

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F15%3APU111677" target="_blank" >RIV/00216305:26110/15:PU111677 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.scientific.net/AMR.1100.185" target="_blank" >http://www.scientific.net/AMR.1100.185</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMR.1100.185" target="_blank" >10.4028/www.scientific.net/AMR.1100.185</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Test of Adhesion and Shear Strength of Polyurethane Adhesives to Cement-bonded Particleboard

Popis výsledku v původním jazyce

This research case was carried out to examine the possibility of usage of cement-bonded composite particleboards as a sheathing of a vented façade system with bonded joints. The potential of bonded joints in combination with composite cladding material was studied and described in more detail as well as verified through experimental measurements. For the purpose of tests spruce timber profiles were chosen for the load bearing substructure. Three types of industrial adhesives intended for structural bonding were selected. The article is focused on the preparation as well as on the subsequent experimental verification of the substructure bonding retention to the cladding and the determination of shear strength under tensile stress at a temperature of (20.0+/-3) oC and a relative humidity of (55.0+/-10) %. The test results proved the fact that bonded joints are more than suitable equivalent to the mechanical joints. Furthermore, the series of tests verified the suitability of use of the chosen adhesives in combination with cement-bonded particleboard.

Název v anglickém jazyce

Test of Adhesion and Shear Strength of Polyurethane Adhesives to Cement-bonded Particleboard

Popis výsledku anglicky

This research case was carried out to examine the possibility of usage of cement-bonded composite particleboards as a sheathing of a vented façade system with bonded joints. The potential of bonded joints in combination with composite cladding material was studied and described in more detail as well as verified through experimental measurements. For the purpose of tests spruce timber profiles were chosen for the load bearing substructure. Three types of industrial adhesives intended for structural bonding were selected. The article is focused on the preparation as well as on the subsequent experimental verification of the substructure bonding retention to the cladding and the determination of shear strength under tensile stress at a temperature of (20.0+/-3) oC and a relative humidity of (55.0+/-10) %. The test results proved the fact that bonded joints are more than suitable equivalent to the mechanical joints. Furthermore, the series of tests verified the suitability of use of the chosen adhesives in combination with cement-bonded particleboard.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/FR-TI4%2F332" target="_blank" >FR-TI4/332: Nové technologie lepených obvodových plášťů budov s kotvícími prvky se zvýšenou odolností vůči korozi</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Advanced Materials Research

ISSN

1022-6680

e-ISSN

1662-8985

Svazek periodika

1100

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

4

Strana od-do

185-188

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—