Efektivita dvojstupňového slinování keramických materiálů
Popis výsledku
Bylo studováno slinování Al2O3 a ZrO2 (stabilizovaného 3mol% Y2O3) metodou tzv. dvojstupňového slinování. Získané výsledky nepotvrdily výsledky publikované v nedávné minulosti pro materiály Y2O3 a BaTiO3. Teploty prvního i druhého stupně slinování potřebné ke slinutí Al2O3 a ZrO2 do hustot vyšších než 95% teoretické hustoty musely být voleny vyšší, než odpovídaly teoretickým modelům uvedeným autory metody dvojstupňového slinování. Deklarovaný pozitivní vliv metody dvojstupňového slinování na snížení konečné velikosti zrn slinuté keramiky nebyl u ytriem stabilizované ZrO2 keramiky prokázán vůbec, u Al2O3 keramiky jen v omezené míře. Naopak u keramiky SrTiO3 s perovskitovou strukturou vedlo dvoujstupňové slinování ke snížení velikosti zrn o asi 60% ve srovnání s konvenčním jednostupňovým slinováním.
Klíčová slova
Identifikátory výsledku
Kód výsledku v IS VaVaI
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
The efficiency of two-step sintering method in ceramics processing
Popis výsledku v původním jazyce
The influence of the Two-Step Sintering (TSS) process on the final microstructure of various oxide ceramic materials with different crystal structures was studied. In this work, Al2O3, ZrO2 (stabilized with 3mol%Y2O3) and SrTiO3 powders were cold isostatically pressed and sintered according to different TSS schedules. The final density of sintered samples was determined using Archimedes principle and the grain size by the linear intercept method. The results obtained by TSS were compared with microstructures achieved by Single-Step Sintering. The work showed the selective efficiency of the TSS method in material processing. Although various temperatures of the first and second steps of TSS, as well as different dwell times in the second step of TSS, were tested for hexagonal alumina and tetragonal zirconia ceramics, the method of TSS did not bring any improvement of the microstructure of these ceramic materials. On the other hand, TSS was successful in the sintering of cubic SrTiO3 cer
Název v anglickém jazyce
The efficiency of two-step sintering method in ceramics processing
Popis výsledku anglicky
The influence of the Two-Step Sintering (TSS) process on the final microstructure of various oxide ceramic materials with different crystal structures was studied. In this work, Al2O3, ZrO2 (stabilized with 3mol%Y2O3) and SrTiO3 powders were cold isostatically pressed and sintered according to different TSS schedules. The final density of sintered samples was determined using Archimedes principle and the grain size by the linear intercept method. The results obtained by TSS were compared with microstructures achieved by Single-Step Sintering. The work showed the selective efficiency of the TSS method in material processing. Although various temperatures of the first and second steps of TSS, as well as different dwell times in the second step of TSS, were tested for hexagonal alumina and tetragonal zirconia ceramics, the method of TSS did not bring any improvement of the microstructure of these ceramic materials. On the other hand, TSS was successful in the sintering of cubic SrTiO3 cer
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JH - Keramika, žáruvzdorné materiály a skla
OECD FORD obor
—
Návaznosti výsledku
Projekt
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2008
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Proc. 10th ECerS Conf.
ISBN
3-87264-022-4
ISSN
—
e-ISSN
—
Počet stran výsledku
5
Strana od-do
—
Název nakladatele
Göller Verlag
Místo vydání
Baden-Baden, Germany
Místo konání akce
Berlín
Datum konání akce
17. 6. 2007
Typ akce podle státní příslušnosti
WRD - Celosvětová akce
Kód UT WoS článku
—
Základní informace
Druh výsledku
D - Stať ve sborníku
CEP
JH - Keramika, žáruvzdorné materiály a skla
Rok uplatnění
2008