Experimental Study on NOx Formation in Gas-staged Burner Based on the Design of Experiments
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F12%3APU99829" target="_blank" >RIV/00216305:26210/12:PU99829 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Experimental Study on NOx Formation in Gas-staged Burner Based on the Design of Experiments
Popis výsledku v původním jazyce
The presented paper is focused on the experimental study of the influence of combustion operating conditions and burner constructional parts on the formation of nitrogen oxides. The combustion tests were carried out at the large-scale burners testing facility that enables to test the burners up to the heat output of 1,800 kW. The tested burner was the low-NOx type burner, namely the two-staged gas burner. The paper describes in detail the tested burner and the parameters which were changed during the combustion tests. Since the number of parameters was high and if the tests were carried out for all mutual combinations of parameters, the scope of experiment would be disproportionately large, expensive and time consuming. For that reason the combustion tests were carried out according to the sophisticated statistical approach called the design of experiment. Based on the acquired experimental data the mathematical model predicting NOx concentration in flue gas depending on the investigat
Název v anglickém jazyce
Experimental Study on NOx Formation in Gas-staged Burner Based on the Design of Experiments
Popis výsledku anglicky
The presented paper is focused on the experimental study of the influence of combustion operating conditions and burner constructional parts on the formation of nitrogen oxides. The combustion tests were carried out at the large-scale burners testing facility that enables to test the burners up to the heat output of 1,800 kW. The tested burner was the low-NOx type burner, namely the two-staged gas burner. The paper describes in detail the tested burner and the parameters which were changed during the combustion tests. Since the number of parameters was high and if the tests were carried out for all mutual combinations of parameters, the scope of experiment would be disproportionately large, expensive and time consuming. For that reason the combustion tests were carried out according to the sophisticated statistical approach called the design of experiment. Based on the acquired experimental data the mathematical model predicting NOx concentration in flue gas depending on the investigat
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JP - Průmyslové procesy a zpracování
OECD FORD obor
—
Návaznosti výsledku
Projekt
Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2012
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Chemical Engineering Transactions
ISSN
1974-9791
e-ISSN
—
Svazek periodika
29
Číslo periodika v rámci svazku
1
Stát vydavatele periodika
IT - Italská republika
Počet stran výsledku
6
Strana od-do
79-84
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—