Local Effects in EHL Contacts with Oil-Impregnated Sintered Materials

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F18%3APU131484" target="_blank" >RIV/00216305:26210/18:PU131484 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.mdpi.com/2075-4442/7/1/1" target="_blank" >https://www.mdpi.com/2075-4442/7/1/1</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/lubricants7010001" target="_blank" >10.3390/lubricants7010001</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Local Effects in EHL Contacts with Oil-Impregnated Sintered Materials

Popis výsledku v původním jazyce

Oil-impregnated open-pored sintered materials can be used to provide the intrinsic self-lubrication of tribological contacts. Although its general functionality was recently confirmed for highly-loaded contacts, detailed analyses on the local effects of surface porosity in tribological contacts are required in order to understand and improve its operating behavior. In this context, this study investigates the influence of different surface finishes at a twin-disk test rig, and the local effects of surface porosity in elastohydrodynamically lubricated (EHL) contacts at an optical tribometer, based on thin film colorimetric interferometry. The results show the detrimental influence of high surface porosity on the operating behavior. Local observations of the lubricant film in EHL contacts indicate the presence of "open" pores, resulting in local film breakdown, and "closed" pores, transporting the additional lubricant into the pressurized zone. An appropriate surface finish technique to manufacture a low permeable layer with an adequate mechanical strength is demanded.

Název v anglickém jazyce

Local Effects in EHL Contacts with Oil-Impregnated Sintered Materials

Popis výsledku anglicky

Oil-impregnated open-pored sintered materials can be used to provide the intrinsic self-lubrication of tribological contacts. Although its general functionality was recently confirmed for highly-loaded contacts, detailed analyses on the local effects of surface porosity in tribological contacts are required in order to understand and improve its operating behavior. In this context, this study investigates the influence of different surface finishes at a twin-disk test rig, and the local effects of surface porosity in elastohydrodynamically lubricated (EHL) contacts at an optical tribometer, based on thin film colorimetric interferometry. The results show the detrimental influence of high surface porosity on the operating behavior. Local observations of the lubricant film in EHL contacts indicate the presence of "open" pores, resulting in local film breakdown, and "closed" pores, transporting the additional lubricant into the pressurized zone. An appropriate surface finish technique to manufacture a low permeable layer with an adequate mechanical strength is demanded.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20302 - Applied mechanics

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Lubricants

ISSN

2075-4442

e-ISSN

—

Svazek periodika

7

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

21

Strana od-do

1-21

Kód UT WoS článku

000457217700002

EID výsledku v databázi Scopus

2-s2.0-85059659603