Fine combustion particles released during combustion of unit mass of beechwood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F19%3APU131694" target="_blank" >RIV/00216305:26210/19:PU131694 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S0960148119303945" target="_blank" >https://www.sciencedirect.com/science/article/pii/S0960148119303945</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.renene.2019.03.089" target="_blank" >10.1016/j.renene.2019.03.089</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fine combustion particles released during combustion of unit mass of beechwood

Popis výsledku v původním jazyce

The combustion of biomass is associated with the production of a significant amount of combustion particles. These particles are entrained by the flue gas from the combustion plant. To assess the type of fuel and the influence of the operating parameters on the fine particle emission, it is useful to know the mass of the fine particles produced at combustion per unit amount of fuel. For this purpose, the authors carried out laboratory combustion tests using thermogravimetric analysis and identification of the fine particle size distribution in the flue gas. Different samples of beechwood were used for experimental measurements. The atmosphere of the combustion process was tested in the range of 0 to 21% of oxygen in a mixture with nitrogen. The measured mass ratios of the fine particles produced and the original fuel sample were compared with the experimental studies of other authors. The resulting mass emissions of fine particles were quantified between 2% and 9% of the initial fuel sample weight.

Název v anglickém jazyce

Fine combustion particles released during combustion of unit mass of beechwood

Popis výsledku anglicky

The combustion of biomass is associated with the production of a significant amount of combustion particles. These particles are entrained by the flue gas from the combustion plant. To assess the type of fuel and the influence of the operating parameters on the fine particle emission, it is useful to know the mass of the fine particles produced at combustion per unit amount of fuel. For this purpose, the authors carried out laboratory combustion tests using thermogravimetric analysis and identification of the fine particle size distribution in the flue gas. Different samples of beechwood were used for experimental measurements. The atmosphere of the combustion process was tested in the range of 0 to 21% of oxygen in a mixture with nitrogen. The measured mass ratios of the fine particles produced and the original fuel sample were compared with the experimental studies of other authors. The resulting mass emissions of fine particles were quantified between 2% and 9% of the initial fuel sample weight.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20704 - Energy and fuels

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

RENEWABLE ENERGY

ISSN

0960-1481

e-ISSN

—

Svazek periodika

140

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

7

Strana od-do

390-396

Kód UT WoS článku

000466250700034

EID výsledku v databázi Scopus

2-s2.0-85063631358