MEASUREMENT OF SOLID PARTICLE EMISSIONS FROM OXY-FUEL COMBUSTION OF BIOMASS IN FLUIDIZED BED

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F22%3A00359300" target="_blank" >RIV/68407700:21220/22:00359300 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.14311/AP.2022.62.0337" target="_blank" >https://doi.org/10.14311/AP.2022.62.0337</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/AP.2022.62.0337" target="_blank" >10.14311/AP.2022.62.0337</a>

Jazyk výsledku

angličtina

Název v původním jazyce

MEASUREMENT OF SOLID PARTICLE EMISSIONS FROM OXY-FUEL COMBUSTION OF BIOMASS IN FLUIDIZED BED

Popis výsledku v původním jazyce

The presented work summarizes the results of the measurement of solid particle emissions from an experimental 30 kW combustion unit. This unit has been used for the research of oxy-fuel combustion of biomass in a fluidized bed, which, when accompanied with carbon capture technologies, is one of the promising ways for decreasing the amount of CO2 in the atmosphere. To implement a carbon capture system, it is first needed to separate various impurities from the flue gas. Therefore, the goal of this work was to identify solid particles contained in the flue gas. Part of the apparatus used for this measurement was an ejector dilutor. To evaluate the results of this measurement, it is key to know the dilution ratio of the dilutor. For this purpose, a method for determining the dilution ratio of an ejector dilutor was proposed and experimentally verified.

Název v anglickém jazyce

MEASUREMENT OF SOLID PARTICLE EMISSIONS FROM OXY-FUEL COMBUSTION OF BIOMASS IN FLUIDIZED BED

Popis výsledku anglicky

The presented work summarizes the results of the measurement of solid particle emissions from an experimental 30 kW combustion unit. This unit has been used for the research of oxy-fuel combustion of biomass in a fluidized bed, which, when accompanied with carbon capture technologies, is one of the promising ways for decreasing the amount of CO2 in the atmosphere. To implement a carbon capture system, it is first needed to separate various impurities from the flue gas. Therefore, the goal of this work was to identify solid particles contained in the flue gas. Part of the apparatus used for this measurement was an ejector dilutor. To evaluate the results of this measurement, it is key to know the dilution ratio of the dilutor. For this purpose, a method for determining the dilution ratio of an ejector dilutor was proposed and experimentally verified.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20704 - Energy and fuels

Projekt

<a href="/cs/project/EF16_019%2F0000753" target="_blank" >EF16_019/0000753: Centrum výzkumu nízkouhlíkových energetických technologií</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Polytechnica

ISSN

1210-2709

e-ISSN

1805-2363

Svazek periodika

62

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

4

Strana od-do

337-340

Kód UT WoS článku

000828107300001

EID výsledku v databázi Scopus

2-s2.0-85134332361