Structured magnetic circuit for magnetorheological damper made by selective laser melting technology

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F19%3APU131828" target="_blank" >RIV/00216305:26210/19:PU131828 - isvavai.cz</a>

Výsledek na webu

<a href="https://iopscience.iop.org/article/10.1088/1361-665X/ab0b8e/pdf" target="_blank" >https://iopscience.iop.org/article/10.1088/1361-665X/ab0b8e/pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1088/1361-665X/ab0b8e" target="_blank" >10.1088/1361-665X/ab0b8e</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Structured magnetic circuit for magnetorheological damper made by selective laser melting technology

Popis výsledku v původním jazyce

Eddy currents are the main reason causing for the long response time of a magnetorheological (MR) damper. Eddy currents are often unwanted parasitic phenomenon for many electromagnetic machines working with an alternating magnetic field. Their reduction can be secured by the use of material with high electrical resistivity such as ferrites or soft magnetic composites. These materials, however, exhibit bad mechanical properties and cannot be used in mechanically loaded parts. Eddy currents can also be reduced by the appropriate structure which must secure high conductivity for the magnetic flux but low electrical conductivity for the electric current flowing perpendicularly to the magnetic flux. This leads to complex structures which, in most cases, cannot be manufactured by conventional methods. This paper describes the design, manufacturing and verification of simulations of the magnetic circuit for a MR damper. Structured magnetic cores printed by selective laser melting technology connects the benefits of low-carbon steel (good mechanical properties, high magnetic saturation and high relative permeability) with benefits of sintered materials (high electric resistivity). The results proved that using the potential of additive manufacturing can not only reduce the eddy currents (and thus shorten the response time and reduce losses), but significantly reduce the weight as well. This technology enables the combination of performance parameters of electromagnetic machines, which cannot be reached by any other existing method.

Název v anglickém jazyce

Structured magnetic circuit for magnetorheological damper made by selective laser melting technology

Popis výsledku anglicky

Eddy currents are the main reason causing for the long response time of a magnetorheological (MR) damper. Eddy currents are often unwanted parasitic phenomenon for many electromagnetic machines working with an alternating magnetic field. Their reduction can be secured by the use of material with high electrical resistivity such as ferrites or soft magnetic composites. These materials, however, exhibit bad mechanical properties and cannot be used in mechanically loaded parts. Eddy currents can also be reduced by the appropriate structure which must secure high conductivity for the magnetic flux but low electrical conductivity for the electric current flowing perpendicularly to the magnetic flux. This leads to complex structures which, in most cases, cannot be manufactured by conventional methods. This paper describes the design, manufacturing and verification of simulations of the magnetic circuit for a MR damper. Structured magnetic cores printed by selective laser melting technology connects the benefits of low-carbon steel (good mechanical properties, high magnetic saturation and high relative permeability) with benefits of sintered materials (high electric resistivity). The results proved that using the potential of additive manufacturing can not only reduce the eddy currents (and thus shorten the response time and reduce losses), but significantly reduce the weight as well. This technology enables the combination of performance parameters of electromagnetic machines, which cannot be reached by any other existing method.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

SMART MATERIALS & STRUCTURES

ISSN

0964-1726

e-ISSN

1361-665X

Svazek periodika

28

Číslo periodika v rámci svazku

55016

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

13

Strana od-do

1-13

Kód UT WoS článku

000473717700001

EID výsledku v databázi Scopus

2-s2.0-85065912195