Novel atomizer concept for CCS applications: Impinging effervescent atomizer

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F23%3APU147102" target="_blank" >RIV/00216305:26210/23:PU147102 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S1383586623001673" target="_blank" >https://www.sciencedirect.com/science/article/pii/S1383586623001673</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.seppur.2023.123259" target="_blank" >10.1016/j.seppur.2023.123259</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Novel atomizer concept for CCS applications: Impinging effervescent atomizer

Popis výsledku v původním jazyce

The concept design, testing of spray characteristics, and performance comparison of an original type of atomizer, the impinging effervescent atomizer (IEA), are introduced in this study. The liquid impinging is beneficially deployed in plain-orifice and external mixing twin fluid atomizers. IEA uses a collision of two or more effervescent liquid streams to improve the atomization and alter the spray characteristics. The Phase Doppler Anemometry (PDA) measurement technique and high-speed visualization of the liquid discharge and spray structure were used. The discharge coefficient (Cd), atomization efficiency (ηa), spray characteristics as a spray cone angle (SCA), integral Sauter mean diameter (ISMD), integral relative span factor (IRSF), and droplet size and velocity distribution inside the spray were investigated. The correlations for Cd, SCA, ISMD and IRSF are provided for a fast and reliable atomizer design to fit any application and operating conditions. The IEA provides a controllable SCA governed mainly by the exit orifice geometry. The ISMD is primarily controlled by the gas to liquid ratio (GLR) and the inlet pressure (pin). The impinging angle (β) has little effect on ISMD. A narrower droplet size distribution, mass redistribution within the spray, and a more uniform droplet size spatial distribution were observed for the IEA in comparison to other tested atomizers. The IEA spray covers 116% more area than single-orifice effervescent sprays, and the area coverage can be controlled by β. This coverage increases by 177% if β changes from 15 to 45°. Spray eccentricity (e) decreases with the increase of the number of the exit orifices (No) resulting in a more uniform droplet spatial distribution. The β, GLR and pin have no effect on e. The ηa of the IEA is equivalent to other internally mixing twin-fluid atomizers; the atomization air contains more than 90% of the delivered energy. The favourable IEA spray characteristics, such as IRSF, ISMD, spray coverage, S

Název v anglickém jazyce

Novel atomizer concept for CCS applications: Impinging effervescent atomizer

Popis výsledku anglicky

The concept design, testing of spray characteristics, and performance comparison of an original type of atomizer, the impinging effervescent atomizer (IEA), are introduced in this study. The liquid impinging is beneficially deployed in plain-orifice and external mixing twin fluid atomizers. IEA uses a collision of two or more effervescent liquid streams to improve the atomization and alter the spray characteristics. The Phase Doppler Anemometry (PDA) measurement technique and high-speed visualization of the liquid discharge and spray structure were used. The discharge coefficient (Cd), atomization efficiency (ηa), spray characteristics as a spray cone angle (SCA), integral Sauter mean diameter (ISMD), integral relative span factor (IRSF), and droplet size and velocity distribution inside the spray were investigated. The correlations for Cd, SCA, ISMD and IRSF are provided for a fast and reliable atomizer design to fit any application and operating conditions. The IEA provides a controllable SCA governed mainly by the exit orifice geometry. The ISMD is primarily controlled by the gas to liquid ratio (GLR) and the inlet pressure (pin). The impinging angle (β) has little effect on ISMD. A narrower droplet size distribution, mass redistribution within the spray, and a more uniform droplet size spatial distribution were observed for the IEA in comparison to other tested atomizers. The IEA spray covers 116% more area than single-orifice effervescent sprays, and the area coverage can be controlled by β. This coverage increases by 177% if β changes from 15 to 45°. Spray eccentricity (e) decreases with the increase of the number of the exit orifices (No) resulting in a more uniform droplet spatial distribution. The β, GLR and pin have no effect on e. The ηa of the IEA is equivalent to other internally mixing twin-fluid atomizers; the atomization air contains more than 90% of the delivered energy. The favourable IEA spray characteristics, such as IRSF, ISMD, spray coverage, S

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10305 - Fluids and plasma physics (including surface physics)

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

SEPARATION AND PURIFICATION TECHNOLOGY

ISSN

1383-5866

e-ISSN

1873-3794

Svazek periodika

311

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

20

Strana od-do

„“-„“

Kód UT WoS článku

000927363900001

EID výsledku v databázi Scopus

2-s2.0-85147312192