Comparison of commercial nitrate-based accelerators and their pure constituents on hydration kinetics, composition, and hydration degree of zinc oxide blended Portland cement

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26310%2F26%3A0198675" target="_blank" >RIV/00216305:26310/26:0198675 - isvavai.cz</a>

Výsledek na webu

<a href="https://link.springer.com/article/10.1007/s10973-025-14193-w" target="_blank" >https://link.springer.com/article/10.1007/s10973-025-14193-w</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/s10973-025-14193-w" target="_blank" >10.1007/s10973-025-14193-w</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Comparison of commercial nitrate-based accelerators and their pure constituents on hydration kinetics, composition, and hydration degree of zinc oxide blended Portland cement

Popis výsledku v původním jazyce

The rising concentration of zinc in ordinary Portland cement has a concerning impact on the behaviour of cement-based mortars by drastically prolonging setting time and decreasing early mechanical properties. The current theory behind the mechanism of the effect of this contaminant is the depletion of Ca2+ ions from pore solution and the formation of a semipermeable layer of CaZn2(OH)(6)center dot 2 H2O on the surface of silicate cement phases, thus retarding their hydration. The cement industry employs various additives to counteract these problems in the form of water-soluble salts of alkali metals such as sodium nitrate. The induction period, which describes the time interval before the setting of cement, can be easily determined by various calorimetric methods. One of the simplest methods is isoperibolic calorimetry, which gives information about the natural behaviour of samples in a set environment by measuring temperature changes in the sample placed in a stable ambient environment. This factor can be determined using differential thermal analysis, indicating the degree of retardation. X-ray diffraction and scanning electron microscopy can also study composition changes. These methods are commonly used to determine phase changes in materials. Pure nitrates proved to be more effective at reducing setting time than commercial additives. Calcium and sodium nitrates reduced the setting time of zinc-contaminated Portland cement from similar to 200 h to about 60 h. The commercial accelerators reduced setting time to about 120 h. Every accelerator used to mitigate retardation of setting reduced setting time without compromising mechanical properties. The highest doses of pure nitrates slightly increased setting time and decreased compressive strength, probably due to the destabilisation of ettringite in a high alkali environment and the displacement of sulphate ions by nitrate ions. This indicates a hard limit for the dose of nitrates. This phenomenon was not observed in high doses of commercial accelerators.

Název v anglickém jazyce

Comparison of commercial nitrate-based accelerators and their pure constituents on hydration kinetics, composition, and hydration degree of zinc oxide blended Portland cement

Popis výsledku anglicky

The rising concentration of zinc in ordinary Portland cement has a concerning impact on the behaviour of cement-based mortars by drastically prolonging setting time and decreasing early mechanical properties. The current theory behind the mechanism of the effect of this contaminant is the depletion of Ca2+ ions from pore solution and the formation of a semipermeable layer of CaZn2(OH)(6)center dot 2 H2O on the surface of silicate cement phases, thus retarding their hydration. The cement industry employs various additives to counteract these problems in the form of water-soluble salts of alkali metals such as sodium nitrate. The induction period, which describes the time interval before the setting of cement, can be easily determined by various calorimetric methods. One of the simplest methods is isoperibolic calorimetry, which gives information about the natural behaviour of samples in a set environment by measuring temperature changes in the sample placed in a stable ambient environment. This factor can be determined using differential thermal analysis, indicating the degree of retardation. X-ray diffraction and scanning electron microscopy can also study composition changes. These methods are commonly used to determine phase changes in materials. Pure nitrates proved to be more effective at reducing setting time than commercial additives. Calcium and sodium nitrates reduced the setting time of zinc-contaminated Portland cement from similar to 200 h to about 60 h. The commercial accelerators reduced setting time to about 120 h. Every accelerator used to mitigate retardation of setting reduced setting time without compromising mechanical properties. The highest doses of pure nitrates slightly increased setting time and decreased compressive strength, probably due to the destabilisation of ettringite in a high alkali environment and the displacement of sulphate ions by nitrate ions. This indicates a hard limit for the dose of nitrates. This phenomenon was not observed in high doses of commercial accelerators.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20303 - Thermodynamics

Projekt

<a href="/cs/project/GA19-16646S" target="_blank" >GA19-16646S: Potlačení negativního vlivu zinku v Portlandském cementu pomocí akcelerátorů hydratace</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2025

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Thermal Analysis and Calorimetry

ISSN

1388-6150

e-ISSN

1588-2926

Svazek periodika

150

Číslo periodika v rámci svazku

10

Stát vydavatele periodika

HU - Maďarsko

Počet stran výsledku

19

Strana od-do

7391-7409

Kód UT WoS článku

001473967800001

EID výsledku v databázi Scopus

—