Corrosion Resistance of Casings for Metal Detectors in Food Industry Made of Cr-Ni Stainless Steel

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26316919%3A_____%2F15%3A%230000626" target="_blank" >RIV/26316919:_____/15:#0000626 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.scientific.net" target="_blank" >http://www.scientific.net</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.647.248" target="_blank" >10.4028/www.scientific.net/KEM.647.248</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Corrosion Resistance of Casings for Metal Detectors in Food Industry Made of Cr-Ni Stainless Steel

Popis výsledku v původním jazyce

The paper discusses the problem of recurrent corrosion of casing of metal detectors used in food industry. The detector casing is fabricated by welding sheets of X5CrNi18-10 stainless steel. The detectors in service suffered non-uniform spot corrosion. The likely cause of the corrosion attack was the accumulated contamination of the detector surface with cleaning and disinfecting agents containing chlorine. The sheet surfaces of the original detectors were shot-blasted. After the sheet finishing processwas changed to grinding and minor design changes were made, the corrosion resistance of the detector casing improved. The enhanced corrosion resistance of the detectors with ground surfaces was confirmed by salt spray tests. The use of the modified detectors then led to a lower number of complaints of the device.

Název v anglickém jazyce

Corrosion Resistance of Casings for Metal Detectors in Food Industry Made of Cr-Ni Stainless Steel

Popis výsledku anglicky

The paper discusses the problem of recurrent corrosion of casing of metal detectors used in food industry. The detector casing is fabricated by welding sheets of X5CrNi18-10 stainless steel. The detectors in service suffered non-uniform spot corrosion. The likely cause of the corrosion attack was the accumulated contamination of the detector surface with cleaning and disinfecting agents containing chlorine. The sheet surfaces of the original detectors were shot-blasted. After the sheet finishing processwas changed to grinding and minor design changes were made, the corrosion resistance of the detector casing improved. The enhanced corrosion resistance of the detectors with ground surfaces was confirmed by salt spray tests. The use of the modified detectors then led to a lower number of complaints of the device.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Key Engineering Materials

ISSN

1662-9795

e-ISSN

—

Svazek periodika

647

Číslo periodika v rámci svazku

25.3.2015

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

7

Strana od-do

248-254

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—