Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26316919%3A_____%2F20%3AN0000022" target="_blank" >RIV/26316919:_____/20:N0000022 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/abs/pii/S1751616120305671" target="_blank" >https://www.sciencedirect.com/science/article/abs/pii/S1751616120305671</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.jmbbm.2020.104016" target="_blank" >10.1016/j.jmbbm.2020.104016</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants

Popis výsledku v původním jazyce

Commercially pure Ti is a typical material for dental implants. Besides oral environmental effects, implants are seriously mechanically loaded during the lifetime. Mechanical resistance of coarse and ultra-fine grained Ti grade 4 was investigated. Significant grain size refinement resulting in the 65% increase of the proof stress is reported. The fatigue endurance limit increased from 523 MPa to 698 MPa due to grain refinement. The influence of sandblasting combined with acid etching on fatigue damage of both material states was analyzed. The surface treatment was proven as detrimental to the fatigue properties of both material states, due to reduction of the fatigue initiation stage. Nevertheless, the fatigue endurance limit of the surface-treated ultra-fine grained material remained higher than the fatigue endurance limit of the coarse-grained material without surface treatment. Reported results confirm better mechanical resistance of ultra-fine grained materials for dental implants in the comparison with coarse-grain one.

Název v anglickém jazyce

Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants

Popis výsledku anglicky

Commercially pure Ti is a typical material for dental implants. Besides oral environmental effects, implants are seriously mechanically loaded during the lifetime. Mechanical resistance of coarse and ultra-fine grained Ti grade 4 was investigated. Significant grain size refinement resulting in the 65% increase of the proof stress is reported. The fatigue endurance limit increased from 523 MPa to 698 MPa due to grain refinement. The influence of sandblasting combined with acid etching on fatigue damage of both material states was analyzed. The surface treatment was proven as detrimental to the fatigue properties of both material states, due to reduction of the fatigue initiation stage. Nevertheless, the fatigue endurance limit of the surface-treated ultra-fine grained material remained higher than the fatigue endurance limit of the coarse-grained material without surface treatment. Reported results confirm better mechanical resistance of ultra-fine grained materials for dental implants in the comparison with coarse-grain one.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/LO1412" target="_blank" >LO1412: Rozvoj Západočeského materiálově metalurgického Centra</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2020

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

ISSN

1751-6161

e-ISSN

1878-0180

Svazek periodika

111

Číslo periodika v rámci svazku

Listopad 2020

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

18

Strana od-do

nestránkováno

Kód UT WoS článku

000575377200004

EID výsledku v databázi Scopus

2-s2.0-85089275388