INCA D1.1 – OKaP rig design and licesing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26722445%3A_____%2F21%3AN0000175" target="_blank" >RIV/26722445:_____/21:N0000175 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

INCA D1.1 – OKaP rig design and licesing

Popis výsledku v původním jazyce

An irradiation rig, called OKAP, was developed at Research Centre Rez (CVR) and will be used within the INCA JEEP project for irradiation of samples in the LVR-15 experimental reactor of CVR. The rig allows irradiation and subsequent assessment of irradiation induced creep of the cladding tube-type samples within the development of the accident tolerant fuels (ATF). In total, 16 tube-type samples with a length of 75 mm will be accommodated in the rig. Two substrate tubes materials (Opt. ZirloTM and E110 alloys) with various coatings will be irradiated at both pressurized and unpressurized conditions. A prototype of the OKAP rig has been developed, assembled and tested in the LVR-15 reactor. Subsequently, the rig was modified in order to achieve specific conditions required by the INCA JEEP project. In this report, the irradiation rig will be described including supporting neutronic and thermal analyses and a detailed description of the design. Moreover, the licensing procedure will be mentioned

Název v anglickém jazyce

INCA D1.1 – OKaP rig design and licesing

Popis výsledku anglicky

An irradiation rig, called OKAP, was developed at Research Centre Rez (CVR) and will be used within the INCA JEEP project for irradiation of samples in the LVR-15 experimental reactor of CVR. The rig allows irradiation and subsequent assessment of irradiation induced creep of the cladding tube-type samples within the development of the accident tolerant fuels (ATF). In total, 16 tube-type samples with a length of 75 mm will be accommodated in the rig. Two substrate tubes materials (Opt. ZirloTM and E110 alloys) with various coatings will be irradiated at both pressurized and unpressurized conditions. A prototype of the OKAP rig has been developed, assembled and tested in the LVR-15 reactor. Subsequently, the rig was modified in order to achieve specific conditions required by the INCA JEEP project. In this report, the irradiation rig will be described including supporting neutronic and thermal analyses and a detailed description of the design. Moreover, the licensing procedure will be mentioned

Druh

O - Ostatní výsledky

CEP obor

—

OECD FORD obor

20305 - Nuclear related engineering; (nuclear physics to be 1.3);

Projekt

—

Návaznosti

—

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů