Study of the behaviour of innovative materials in liquid metal environment

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26722445%3A_____%2F24%3AN0000149" target="_blank" >RIV/26722445:_____/24:N0000149 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.confer.cz/metal/2024/4949-study-of-the-behaviour-of-innovative-materials-in-liquid-metal-environment" target="_blank" >https://www.confer.cz/metal/2024/4949-study-of-the-behaviour-of-innovative-materials-in-liquid-metal-environment</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.37904/metal.2024.4949" target="_blank" >10.37904/metal.2024.4949</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Study of the behaviour of innovative materials in liquid metal environment

Popis výsledku v původním jazyce

Austenitic steel 316L with applied coating was studied to find a suitable material for impeller of main circulation pump at working conditions of small modular lead fast reactor. The chemical compatibility of the materials to the liquid metal environment was evaluated in liquid lead environment containing oxygen to ensure the oxidation while simulating temperature cycling. The operating temperature was controlled to vary between 450 °C and 520 °C, which are the temperatures that can occur in the system. The tests were designed to verify the effect of the different thermal expansion of the steel and the coatings on the corrosion resistance of the system. Austenitic steel 316L was used as a reference material and coatings base on Ti, Al, and W applied by physical vapor deposition were used for corrosion resistance improvement. Microscopical investigation identified oxidation, solution-based attack (SBA), and Pb penetration into the material. The damage to the coatings depended on their chemical composition and structure of the coating. However, in general, the application of the coating increased the resistance of the surface to corrosion damage and the thermal cycling did not affect the adhesion of the coating to the steel.

Název v anglickém jazyce

Study of the behaviour of innovative materials in liquid metal environment

Popis výsledku anglicky

Austenitic steel 316L with applied coating was studied to find a suitable material for impeller of main circulation pump at working conditions of small modular lead fast reactor. The chemical compatibility of the materials to the liquid metal environment was evaluated in liquid lead environment containing oxygen to ensure the oxidation while simulating temperature cycling. The operating temperature was controlled to vary between 450 °C and 520 °C, which are the temperatures that can occur in the system. The tests were designed to verify the effect of the different thermal expansion of the steel and the coatings on the corrosion resistance of the system. Austenitic steel 316L was used as a reference material and coatings base on Ti, Al, and W applied by physical vapor deposition were used for corrosion resistance improvement. Microscopical investigation identified oxidation, solution-based attack (SBA), and Pb penetration into the material. The damage to the coatings depended on their chemical composition and structure of the coating. However, in general, the application of the coating increased the resistance of the surface to corrosion damage and the thermal cycling did not affect the adhesion of the coating to the steel.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/TK04030082" target="_blank" >TK04030082: Pretty Fast Flow</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Metal 2024 : 33rd International Conference on Metallurgy and Materials : Conference proceedings

ISBN

978-80-88365-21-1

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

317-322

Název nakladatele

Tanger, Ltd.

Místo vydání

—

Místo konání akce

Brno

Datum konání akce

22. 5. 2024

Typ akce podle státní příslušnosti

CST - Celostátní akce

Kód UT WoS článku

—